2013 TESLA MODEL S Recalls (6)
- Campaign:
- 13V249000 on 06/13/2013
- Component:
- Seats
- Manufactured:
- 05/09/2013 - 06/07/2013
- Affected:
- 1,228
- Defect:
- Tesla motors, inc. (tesla) is recalling certain model year 2013 model s electric vehicles manufactured may 10, 2013, through june 8, 2013. an improper method for aligning the left hand seat back striker to the bracket may have weakened the weld between the bracket and the frame of the vehicle.
- Consequence:
- In the event of a crash, the left hand seat back may not stay mounted, increasing the risk of injury to passengers.
- Correction:
- Tesla will notify owners, and tesla service centers will inspect the left hand second row strikers. tesla will add additional mounting hardware to ensure a proper joint between the bracket and the frame, free of charge. the recall began on june 24, 2013. owners may contact tesla at 1-650-681-5000.
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
- Campaign:
- 14V006000 on 01/12/2014
- Component:
- Equipment:electrical
- Affected:
- 21,081
- Defect:
- Tesla motors, inc. (tesla) is recalling certain model year 2013 model s vehicles equipped for, and delivered with, certain nema 14-50 (240 volt) universal mobile connector (umc) adapters. during charging, the adapter, cord, or wall outlet could overheat.
- Consequence:
- An overheated adapter, cord, or wall outlet increases the risk of burn injury and/or fire.
- Correction:
- Tesla will notify owners and provide an "over-the-air" software update. some owners have already received this update. this update allows the model s on board charging system to detect any unexpected fluctuations in the input power or higher resistance connections to the vehicle. if detected, the onboard charging system will automatically reduce the charging current by 25%. tesla owners can verify that they have received the updated software (version 5.8.4 or later) by viewing the vehicle's center information screen. additionally, tesla will mail owners a replacement nema 14-50 adapter that is equipped with an internal thermal fuse. the recall began on march 14, 2014. owners may contact tesla service center at 1-877-79-tesla (1-877-798-3752).
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
- Campaign:
- 15V780000 on 11/22/2015
- Component:
- Seat belts:front
- Manufactured:
- 05/30/2012 - 11/11/2015
- Affected:
- 59,415
- Defect:
- Tesla motors, inc. (tesla) is recalling certain model year 2012-2015 model s vehicles manufactured may 31, 2012, to november 12, 2015. the affected vehicles are equipped with driver or front passenger seat belts that may be improperly connected to the outboard lap pretensioner.
- Consequence:
- If the seat belt is not correctly attached to the pretensioner, it may not properly restrain the seat occupant in the event of a crash, increasing their risk of injury.
- Correction:
- Tesla will notify owners, and service centers will inspect the driver and front passenger seat belts, correcting their connection, as necessary, free of charge. the recall began on december 14, 2015. owners may contact tesla customer service at 1-877-798-3752. tesla's number for this recall is sb-15-20-002.
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
- Campaign:
- 17V260000 on 04/19/2017
- Component:
- Parking brake
- Manufactured:
- 07/11/2012 - 11/16/2016
- Affected:
- 31,709
- Defect:
- Tesla, inc. (tesla) is recalling certain 2016 model s and model x vehicles. the electric parking brake calipers have an internal gear that may be improperly manufactured, possibly resulting in the gear fracturing during parking brake application or release.
- Consequence:
- If the gear breaks during parking brake release, the vehicle will not be able to be moved. if the gear breaks during parking brake application, the parking brake may not adequately hold the vehicle, potentially resulting in the vehicle rolling, increasing the risk of a crash.
- Correction:
- Tesla will notify owners, and service centers will replace the electric parking brake calipers, free of charge. a remedy is currently unavailable. interim notices informing owners of the safety risk were mailed june 8, 2017. owners will receive a second notice when the remedy becomes available. owners may contact tesla customer service at 1-877-798-3752. tesla's number for this recall is sb-17-33-002.
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
- Campaign:
- 18V031000 on 01/11/2018
- Component:
- Air bags:passenger side frontal
- Manufactured:
- 12/31/2012 - 12/30/2013
- Affected:
- 17,846
- Defect:
- Tesla, inc. (tesla) is recalling all 2013 model s vehicles equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. in the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
- Consequence:
- An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
- Correction:
- Tesla will notify owners, and tesla service centers will replace the passenger frontal air bag modules, free of charge. the recall is expected to begin in march 2018. owners may contact tesla customer service at 1-877-798-3752. tesla's number for this recall is sb-18-20-001.
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
- Campaign:
- 18V204000 on 03/29/2018
- Component:
- Steering:electric power assist system
- Manufactured:
- 05/30/2012 - 04/08/2016
- Affected:
- 70,421
- Defect:
- Tesla, inc. (tesla) is recalling certain 2012-2016 tesla model s vehicles equipped with bosch steering racks. the aluminum bolts that attach the power steering gear assist motor to the gear housing may corrode and fracture causing a reduction or complete loss of power steering assist.
- Consequence:
- Loss of power steering assist would require a higher steering effort, especially at lower speeds, which may increase the risk of a crash.
- Correction:
- Tesla will notify owners, and tesla service centers will replace the steering gear mounting bolts and add a corrosion-preventative sealer, free of charge. owners may contact tesla customer service at 1-877-798-3752. tesla's number for this recall is sb-18-32-002.
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
2013 TESLA MODEL S TSBs (35)
- Bulletin:
- SB-12-31-001
- Component:
- 203000 wheels:lugs/nuts/bolts
- Summary:
- Tesla: because of improper preload on rear wheel bearings, due to repeated heavy acceleration, can cause rear wheel axle nuts to lose proper torque and premature bearing wear. model 2012 model s. *pe updated 1/24/2014 *js
- Bulletin:
- SB-12-17-013
- Component:
- 111000 electrical system:battery
- Summary:
- Tesla: some 12v battery, if overtorqued, are susceptible to weakening and breakage from positive terminals with casting porosity and if terminal fails, after ignition is off, will not restart. model 2012 model s. *pe
- Bulletin:
- SB-12-34-002
- Component:
- 199000 tires:pressure monitoring and regulating systems
- Summary:
- Tesla: once vehicle is parked, air in tires (21 inch wheels) cools, in cold ambient temperatures, can cause tire pressure to decrease below threshold, which is close to proper inflation pressure, resulting in illumination of tire pressure i
- Bulletin:
- SB-13-34-001
- Component:
- 200000 wheels
- Summary:
- Tesla: painted lug nuts or overspray paint on seat, might be corroded in thread area, leading to inadequate clamping torque and needs to be corrected to prevent vibration, shimming, knocking or clunking noise, while driving. model 2012 mo
- Bulletin:
- SB-12-44-005
- Component:
- 110000 electrical system
- Summary:
- Tesla motors: procedures to reconfigure the coolant lines and firmware in order to install a second charger. model includes model s all model years. *js
- Bulletin:
- TN-13-16-002
- Component:
- 111000 electrical system:battery
- Summary:
- Tesla: when removing the battery pack these procedures need to be followed in order to ensure proper sealing of the hv rapid mate. no model or model years given. *js
- Bulletin:
- TN-13-44-002
- Component:
- 111000 electrical system:battery
- Summary:
- Tesla: high voltage awareness for model s. this is not an official bulletin. no model years were provided. *js
- Bulletin:
- TN-13-44-003
- Component:
- 111000 electrical system:battery
- Summary:
- Tesla: the high voltage interlock loop (hvil) diagnostic guide. this is not an official bulletin. no model types or model years were provided. *js updated 10/21/14. *pe
- Bulletin:
- TN-13-44-001
- Component:
- 111000 electrical system:battery
- Summary:
- Tesla: due to isolation of model s high voltage, a monitor is installed in battery to ensure no electrical current, between vehicle and high voltage conductor, is being carried and is measured, periodically, for resistance between high vol
- Bulletin:
- SB-14-21-004
- Component:
- 117000 digital instrument panel
- Summary:
- Tesla: inside instrument cluster (ic), circuit board was soldered, while using an improper flux, in some vehicles, and can lead to shorter than expected lifespan and quality concerns. model 2012-2014 s. *pe
- Bulletin:
- SB-14-17-003
- Component:
- 162300 structure:body:door
- Summary:
- Tesla: information and instructions regarding replacement of rear doors, on some vehicles, that may be compatible but fail to have same mounting points for electrical harness. model 2012-2014 s. *pe
- Bulletin:
- SB14-50-002 R1
- Component:
- 356000 equipment adaptive
- Summary:
- Tesla: when charging, corrosion, physical damage to receptacles, or inappropriate wiring or installation of electrical outlets can cause higher than normal electrical resistance. model 2012-2014 s. *pe
- Bulletin:
- SB-15-11-001
- Component:
- 162000 structure:body
- Summary:
- Tesla motors: 2012-2014 s models; bulletin instructions and repair guidelines for draft entering cabin from a-pillar. *lj
- Bulletin:
- SB-14-40-001
- Component:
- 181000 vehicle speed control:accelerator pedal
- Summary:
- Tesla: 2013-2014 model s: information regarding replacing rear drive unit produced with inadequate grease, which could lead to a "clunk" sound when using the accelerator while driving. *lj
- Bulletin:
- 15-17-005
- Component:
- 110000 high voltage battery
- Summary:
- Tesla motors, inc 2012-2014: bulletin information regarding upgraded 12v positive jump post needs replacement of the old post which can cause corrosion & prevent external charging of the 12v battery. *lj
- Bulletin:
- 13-31-003
- Component:
- 021500 suspension:front:control arm
- Summary:
- Tesla motors, inc 2012-2013 model s: information regarding front lower control arm ball joints developing greater free play than expected. installing (4)wedge- lock washers on the lower arm ball joint will correct the problem. *lj
- Bulletin:
- 14-40-001
- Component:
- 105500 power train:driveline:differential unit
- Summary:
- Tesla motors inc 2013-2014 model s : buletin information regarding replacing rear drive unit. some units have inadequate grease, which may cause a loud clunking sound during accelerator. *lj
- Bulletin:
- SB-13-96-002
- Component:
- 131000 visibility:windshield
- Summary:
- Tesla motors inc. : service bulletin supersedes sb-12-95-002 revision dated november 12, 2012 . mrb parts returns list for all non-maintenance related model s parts except 6005894 & 1021634. *lj
- Bulletin:
- SB-13-50-003
- Component:
- 115000 electrical system:fuses and circuit breakers
- Summary:
- Tesla motors inc. : instructions on reassembly of hpwc fuses. *lj
- Bulletin:
- SB-13-44-010
- Component:
- 350000 equipment
- Summary:
- Tesla: information provided in regards to installing a second (slave) charger that is currently configured, in a vehicle, with only one master charger. model 2013-15 s. *pe
- Bulletin:
- SB1315007R3
- Component:
- 350000 equipment
- Summary:
- Describes how to install the center console floor finisher to match the dash trim appearance.
- Bulletin:
- SB1315014R4
- Component:
- 350000 equipment
- Summary:
- Describes how to install the 1st generation premium center console assembly.
- Bulletin:
- SB1313001R6
- Component:
- 222000 seats:mid/rear assembly
- Summary:
- This service bulletin contains installation instructions for the optional third row seat. included in this procedure are steps to add the rear crossmember (if needed), remove and modify existing trim panels, install hardware, add the 2nd ro
- Bulletin:
- SB1690001
- Component:
- 114000 electrical system:wiring
- Summary:
- Describes how to install the performance pedal set accessory.
- Bulletin:
- SB1517003R2
- Component:
- 110000 electrical system
- Summary:
- It is now possible to retrofit the continental tire pressure monitoring system (tpms) onto vehicles that were originally equipped with a baolong tpms.
- Bulletin:
- SB1344010R4
- Component:
- 110000 electrical system
- Summary:
- Upgrade a vehicle from a single 2nd generation charger to dual 2nd generation chargers.
- Bulletin:
- SB1615001
- Component:
- 350000 equipment
- Summary:
- Describes how to retrofit the 2nd generation premium center console assembly.
- Bulletin:
- SB-13-24-006 R3
- Component:
- 134000 visibility:sun roof assembly
- Summary:
- Some model s vehicles might experience wind noise from the leading edge of the panoramic roof at high speed.
- Bulletin:
- SB-14-30-002 R4
- Component:
- 161100 structure: frame and members:underbody shields
- Summary:
- Three metal plates are installed on the front subframe to deflect road debris and protect the underbody from possible damage.
- Bulletin:
- SB-15-16-002 R1
- Component:
- 110000 high voltage battery
- Summary:
- It is possible to accidentally break off the aeroshield support tab from the hv battery. if the tab breaks, the mid aeroshield is not fully supported, reducing the aerodynamic efficiency of the vehicle. the operation of the hv battery is no
- Bulletin:
- SB-15-17-003 R3
- Component:
- 199000 tires:pressure monitoring and regulating systems
- Summary:
- It is now possible to retrofit the continental tire pressure monitoring system (tpms) onto vehicles that were originally equipped with a baolong tpms.
- Bulletin:
- SB-13-90-002 R3
- Component:
- 162000 structure:body
- Summary:
- Instructions for installing the carbon fiber spoiler.
- Bulletin:
- SB-17-10-006 R1
- Component:
- 136000 visibility:windshield wiper/washer
- Summary:
- On model s, the windshield wiper motor bracket might become loose, resulting in a popping or clicking noise during windshield wiper operation.
- Bulletin:
- SB-18-32-002 R1
- Component:
- 010000 steering
- Summary:
- Long-term exposure to high-corrosion environments might weaken the bolts that attach the power steering motor to the steering rack housing.
- Bulletin:
- SB-18-13-002
- Component:
- 220000 seats
- Summary:
- On some model s base trim 1st row seats, the huck bom fastener and pivot bushing used on the front lift links may develop an interactive clearance condition, which might result in a rocking motion in the seat. this does not affect performan
Home | Privacy