2012 PORSCHE 911 TARGA 4S Recall
- Campaign:
- 11V409000 on 08/11/2011
- Component:
- Seat belts
- Manufactured:
- 05/30/2011 - 06/09/2011
- Affected:
- 235
- Defect:
- Porsche is recalling certain model year 2011 911 speedster and 911 gts rs 4.0; and model year 2012 boxster (including s and spyder); cayman (including s and r); 911 carrera (including s, gts, 4, 4s, and 4 gts); 911 targa 4 and targa 4s; and 911 turbo and turbo s models manufactured from may 31, 2011, through june 10, 2011. there is a possibility that the mounting holes in the seat belt anchor plates fitted to the vehicle are too small. if the hole diameter is too small, the anchor plate may not be able to rotate about the fastening bolt as designed.
- Consequence:
- Should this occur, the seat belt may not be routed optimally around the occupant, or may potentially loosen at some point in the future increasing the risk of injury during a crash.
- Correction:
- Porsche will notify owners, and dealers will inspect the seat belt anchors and, if necessary, replace the seat belt. the repairs will be performed free of charge. the safety recall began on september 2, 2011. owners may contact porsche at 1-800-767-7243.
- Notes:
- Porsche's safety recall number is ab02.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
2012 PORSCHE 911 TARGA 4S TSBs (4)
- Bulletin:
- WF86 13315
- Component:
- 350000 equipment
- Summary:
- Summary to be provided on a future date.
- Bulletin:
- 122-M9B2W-05
- Component:
- 162000 structure:body
- Summary:
- Concerns: sealing channel and side panel information: this is to inform you of a voluntary workshop campaign on the above-mentioned vehicles. there is a possibility that the point at which the sealing channel meets the side panel was not p
- Bulletin:
- 122-T7Y5Q-12
- Component:
- 110000 electrical system
- Summary:
- Information: this document updates information previously published in eq 1105, eq 1105, and eq 1401. to provide stable voltage and sufficient current throughout certain service operations, you should connect the vehicle to a battery charg
- Bulletin:
- 122-B9V4V-06
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- Information: the approval and support management system was created to offer assistance to the dealer organization with new and complex technical issues by utilizing the support specialists within porsche r&d. as a result, this process has
Home | Privacy