2010 KENWORTH T2000 Recalls (6)
- Campaign:
- 09V415000 on 10/26/2009
- Component:
- Power train:axle assembly
- Manufactured:
- 11/11/2008 - 09/29/2009
- Affected:
- 914
- Defect:
- Kenworth is recalling model year 2009 through 2010 t2000, t800, t660 and w900 trucks manufactured between november 12, 2008 and september 30, 2009. the axle u-bolts attaching the axle to the suspension leaf spring on certain ag400l rear suspensions may have received insufficient fastener torque during the installation process. the insufficient torque may allow the axle u-bolt to become loose, which may cause vibration in the rear suspension.
- Consequence:
- If multiple fasteners were to become loose, the rear axle may shift relative to the rear suspension leaf spring, which can result in loss of control and a crash.
- Correction:
- Dealers will inspect the axle u-bolts for visible defects, including bent and/or smashed threads and re-torque the axle u-bolts to factory specifications. the recall began on november 4, 2009. owners may contact kenworth at 425-828-5440.
- Notes:
- Kenworth recall no. 09kwa.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
- Campaign:
- 09V490000 on 12/22/2009
- Component:
- Steering
- Manufactured:
- 06/30/2009 - 10/22/2009
- Affected:
- 3,078
- Defect:
- Kenworth is recalling model year 2010 t2000, t800, t660 and w900s trucks manufactured between july 1 and october 23, 2009. the fasteners attaching the steering gear to the front drive bracket may have received insufficient torque during the installation process resulting in less than required clamp load.
- Consequence:
- The insufficient clamp load may allow the fastener(s) to become loose and fall away from the vehicle resulting in road debris. if multiple fasteners were to become loose, the vehicle steering may wander, which could result in a crash.
- Correction:
- Dealers will inspect and re-torque the steering gear mounting bolts free of charge. the safety recall is expected to begin during january 2010. owners may contact kenworth at 1-425-828-5440.
- Notes:
- Kenworth recall no. 09kwb.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
- Campaign:
- 10V185000 on 05/03/2010
- Component:
- Suspension:rear:axle:spindle
- Manufactured:
- 07/29/2009 - 09/17/2009
- Affected:
- 21
- Defect:
- Kenworth is recalling certain model year 2010 t2000, t660, t800 and w900 vehicles manufactured between july 30, 2009 and september 18, 2009. the rear axle outer end hub may have not been primed with oil properly during the rear axle installation process. potential lack of oil may cause the outer end bearing to heat up and/or seize, possibly resulting in the overheating of the wheel end.
- Consequence:
- A wheel end fire may occur, increasing the risk of a crash.
- Correction:
- Dealers will replace the bearings, seals and will add oil to the outer end hub as well as inspect races and axle housing for damage and replacing as necessary free of charge. the safety recall began on may 24, 2010. owners may contact kenworth at 425-828-5440.
- Notes:
- Kenworth recall no. 10kwb.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
- Campaign:
- 10V308000 on 07/01/2010
- Component:
- Steering:column
- Manufactured:
- 05/13/2007 - 04/19/2009
- Affected:
- 9,697
- Defect:
- Paccar is recalling certain model year 2008-2010 trucks equipped with trw steering shafts. the circumferential weld around the steering shaft tube that welds the splined tube to the non-splined tube may be mislocated. mislocation of the circumferential weld may allow the splined tube and non-splined tube to rotate relative to one another during a low speed, high torque turn, possibly resulting in a separation of the two tubes.
- Consequence:
- A separation of the splined and non-splined tubes would cause a loss of steering control and increase the risk of a vehicle crash.
- Correction:
- Dealers will inspect the steering shaft using a weld placement gauge provided by trw. any steering shaft found to have been welded improperly will be replaced free of charge. the safety recall began on july 30, 2010. owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4196.
- Notes:
- Kenworth's recall campaign number is 10kw-f & peterbilt recall no. 0610-d. owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
- Campaign:
- 11V127000 on 02/24/2011
- Component:
- Fuel system, other:storage:tank assembly
- Manufactured:
- 02/18/2007 - 02/22/2011
- Affected:
- 4,664
- Defect:
- Paccar is recalling certain model year 2008-2012 kenworth t2000, t660, t700, t800, and w900, as well as model year 2009-2012 peterbilt 365, 367, 384, 386, 387, 388, 389, and 587 trucks equipped with paccar mx engines. the oil module centrifugal spinner filter cap in the paccar mx engine may become loose, possibly allowing the cap to come off and engine oil to partially discharge from the oil module onto exhaust components.
- Consequence:
- The discharge of engine oil onto exhaust components which are hot, such as when the engine is under significant load, may cause a fire.
- Correction:
- Dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap. this service will be performed free of charge. the safety recall is expected to begin during march 2011. owners may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.
- Notes:
- Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
- Campaign:
- 11V203000 on 03/30/2011
- Component:
- Engine and engine cooling
- Manufactured:
- 05/10/2006 - 09/08/2010
- Affected:
- 5,831
- Defect:
- Paccar is recalling certain model year 2007-2011 kenworth c500, t2000, t600, and t660, as well as model year 2009-2011 peterbilt 387 and 388 trucks equipped with caterpillar c15 engine and manufactured from may 11, 2006, through september 17, 2010. degradation of a combustion tube weld can cause radial heat impingement on the body which may burn through certain bodies used on c15 engines.
- Consequence:
- This could result in a fire.
- Correction:
- Caterpillar is handling the owner notification and remedy for this campaign. please see caterpillar's defect report 11e-006. caterpillar will replace the single piece combustion tube with a thick wall combustion tube which will not allow the heat to break through. this service will be performed free of charge. due to a parts supply issue, owners will be notified by the end of april 2011 about the safety defect, and will then be notified again once the free remedy is available, currently estimated to be around late july 2011. owners may contact caterpillar toll-free at 1-800-447-4986.
- Notes:
- Kenworth safety recall no. 11kwb & peterbilt safety recall no. 0311-a.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
2010 KENWORTH T2000 TSBs (5)
- Bulletin:
- TIB-41-014
- Component:
- 062100 engine and engine cooling:cooling system:radiator assembly
- Summary:
- Paccar: there are cooling modules that may have a loose connection at the charge air cooler mounting. *rm
- Bulletin:
- TIB-42-043
- Component:
- 062200 engine and engine cooling:cooling system:fan
- Summary:
- Paccar: information on fan hub bearings inspection and warranty extension due to a higher than normal failure rate. *rm
- Bulletin:
- TIB-42-48
- Component:
- 062200 engine and engine cooling:cooling system:fan
- Summary:
- Paccar: information on premature fan clutch lining wear. *rm
- Bulletin:
- TIB-45-042
- Component:
- 061000 engine and engine cooling:engine
- Summary:
- Kenworth: information pertaining to updating the engine on certain trucks for new productive engines. emissions label with required clarification. *pe
- Bulletin:
- TIB-43-024
- Component:
- 061000 engine and engine cooling:engine
- Summary:
- Kenworth: information in bulletin pertaining to possible engine derate by which the def filters are clogged and/or contaminated def is identified. *pe
Home | Privacy