2008 MACK GU Recalls (9)

Campaign:
07V098000 on 03/13/2007
Component:
Service brakes, hydraulic:pedals and linkages
Manufactured:
06/27/2005 - 01/30/2007
Affected:
3,587
Defect:
On certain trucks, the cotter pin that retains the brake pedal clevis pin may not have been installed. the clevis pin connects the brake pedal to the brake foot valve.
Consequence:
If the pin were to come loose, the driver would not be able to apply the service brake, which could result in a crash.
Correction:
Dealers will inspect to see if the cotter pin is missing. if the pin is missing, the cotter pin will be installed. owners are being advised not the drive the vehicle until the pin has been installed. the recall began on march 26, 2007. owner may contact mack truck at 1-800-528-6586.
Notes:
Mack trucks recall no. sc0321.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
Campaign:
07V322000 on 07/25/2007
Component:
Steering
Manufactured:
12/13/2006 - 05/21/2007
Affected:
1,072
Defect:
On certain trucks, the nut used to retain the steering shaft may or may not be a lock nut that has the locking feature. a lock nut is required to provide additional resistance to ensure that the nut does not come loose.
Consequence:
If the nut were to come loose and be left untreated, the steering shaft could potentially separate increasing the risk of a crash.
Correction:
Dealers will replace the steering shaft pinch bolts and locknuts free of charge. the recall began on august 24, 2007. owners may contact mack trucks at 1-800-528-6586.
Notes:
Mack trucks recall no. sc0326.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
Campaign:
07V361000 on 08/15/2007
Component:
Service brakes, air:supply:check valve
Manufactured:
01/01/2004 - 07/25/2007
Affected:
21,847
Defect:
On certain trucks equipped with parker single check valves (scv) provided by bendix. the defect exists in the parker scv that connects with the supply port of the sr-7 spring brake modulating valve. after prolonged use of the parker scv, the valve body retainer may become excessively worn and eventually break apart. pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve.
Consequence:
This condition can cause a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button. these conditions can occur without warning, leading to unintended vehicle rollaway, brake drag, or in the case of loss of primary circuit, inability to modulate the spring brakes.
Correction:
Mack is working with bendix to replace the parker single check valve. the recall began on january 9, 2008. owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.
Notes:
Mack recall no. sc0334 (sc0327).customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
Campaign:
07V360000 on 08/15/2007
Component:
Parking brake
Manufactured:
11/03/2005 - 04/30/2007
Affected:
18,805
Defect:
On certain trucks equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
Consequence:
This could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.
Correction:
Mack is working with bendix to repair these vehicles (please see 07e037). bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. the recall began on january 10, 2008. owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.
Notes:
Mack recall no. sc0335 (sc0328).customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
Campaign:
07V478000 on 10/10/2007
Component:
Exterior lighting
Manufactured:
07/01/2007 - 07/18/2007
Affected:
61
Defect:
On certain trucks, the daytime running lights (drl) module may contain a suspect metal-oxide-semiconductor field effect transistor (mosfet) that could overheat.
Consequence:
If the transistor overheats, it could possibly result in a vehicle fire.
Correction:
Dealers will replace the suspect drl module free of charge. the recall began on october 31, 2007. owners may contact mack trucks at 1-800-528-6586.
Notes:
Mack truck recall no. sc0330.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
Campaign:
10V404000 on 09/12/2010
Component:
Service brakes, air
Manufactured:
10/21/2007 - 06/29/2010
Affected:
369
Defect:
Mack is recalling certain model year 2008 through 2011 gu and mru model vehicles manufactured with a front tow glad hand option. the actuation and release timing of the vehicles exceeds the limit which fails to conform to the requirements of federal motor vehicle safety standard no. 121, "air brake systems."
Consequence:
If the brakes do not perform as they should, a vehicle crash could occur.
Correction:
Mack will notify owners and repair the vehicle free of charge. the safety recall began on february 1, 2011. owners may contact mack at 1-877-800-4945.
Notes:
Mack's recall campaign number is sc0345.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
Campaign:
11V292000 on 05/22/2011
Component:
Electrical system:battery:cables
Manufactured:
09/11/2007 - 04/07/2011
Affected:
771
Defect:
Mack trucks is recalling certain model year 2008-2011 gu heavy trucks manufactured from september 12, 2007, through april 8, 2011, with a four battery cable design. as a result of the routing and clipping used, the battery cables may come into contact with frame hardware, which, as a result of chafing, may cause the insulation to become worn to a point where a short occurs.
Consequence:
A short can potentially cause a vehicle fire.
Correction:
Dealers will re-route the battery cables and replace the cables if chafing has occurred. this service will be performed free of charge. the safety recall began on july 11, 2011. owners may contact mack trucks at 1-800-866-1177.
Notes:
Mack's safety recall no. sc0354.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
Campaign:
14V078000 on 02/27/2014
Component:
Electrical system
Affected:
70,208
Defect:
Mack trucks, inc. (mack) notified the agency on february 20, 2014, that they are recalling certain model year 2010-2012 chu, cxu, gu and td vehicles manufactured from june 16, 2009, through july 8, 2011. while continuing to research the scope of the issue, mack expanded the recall on november 18, 2014 to include certain model year 2008-2009 and 2013-2014 chu, cxu, gu and td vehicles manufactured from june 16, 2009, through july 8, 2011. having completed its investigation, mack once again expanded the recall during february 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. the recall now covers model year 2007-2015 includes chu, cxu, gu and td vehicles produced october 13, 2006, through october 3, 2014. in the affected vehicles, the electronic power distribution module (epdm) may be contaminated from water leaks in, and around, the windshield. if exposed to water leaks, contaminants such as road salts may deposit on the epdm.
Consequence:
Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.
Correction:
Mack has notified owners, and dealers will inspect the epdm. if contamination has occurred, dealers will replace the epdm and address the leak, free of charge. owners of model year 2010-2012 chu, cxu, gu and td vehicles were initially notified april 24, 2014. owners affected by the recall expansions were notified in february 2015. owners may contact mack trucks at 1-336-393-2000. mack's number for this recall is sc0375.
Notes:
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
Campaign:
14V208000 on 04/22/2014
Component:
Exterior lighting:turn signal:flasher unit
Manufactured:
02/27/2006 - 11/07/2013
Affected:
44,047
Defect:
Mack trucks inc. (mack) is recalling certain model year 2010-2014 chu, cxu, and mru, 2007 ct and cv, 2008-2014 gu, and 2011-2014 leu, and td trucks manufactured february 28, 2006, through november 8, 2013, and equipped hamsar electronic flasher. the hazard warning lights may fail.
Consequence:
A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.
Correction:
Mack will notify owners, and dealers will replace the electronic flasher unit, free of charge. the recall will begin by mid-june 2014. interim letters went out to owners on june 23, 2014. the recall began on july 25, 2014. owners may contact mack customer service at 1-866-298-6586. mack's number for this recall is sc0379.
Notes:
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.

2008 MACK GU TSBs (96)

Bulletin:
SB 329007
Component:
061000 engine and engine cooling:engine
Summary:
Transmission oil cooler piping revision. *pe updated 7/8/09. model years unknown. *pe
Bulletin:
SB 232028
Component:
061000 engine and engine cooling:engine
Summary:
Fan ring to fan shroud clearance on gu model chassis equipped with either an mp7 or mp8 engine. *pe
Bulletin:
SB 493002
Component:
105000 power train:driveline
Summary:
Revised fasteners for telma yoke and rotor-to-companion flange - gu, mru and leu models with telma retarder. *pe
Bulletin:
SB 531014
Component:
060000 engine and engine cooling
Summary:
Revised air compressor discharge line - mp8 engines. (also applies to mack trucks australia). *pe
Bulletin:
SB 215-033
Component:
062200 engine and engine cooling:cooling system:fan
Summary:
Mack truck: revised fan ring bracket mounting screws. a longer mounting screw (part no. 945444) for the left-side fan ring mounting bracket was implemented into production on all cxu, chu and gu model chassis. *pe
Bulletin:
P-1672
Component:
061000 engine and engine cooling:engine
Summary:
Exhaust rocker arm, combustion sealing washer and unit injector yoke replacement. *pe
Bulletin:
P-1662
Component:
061200 engine and engine cooling:engine:diesel
Summary:
Mack truck: models cxu, chu, gu, mru and leu chassis. us07 mp7 engine management system (ems) software upgrade. the revision includes a reduction i n peak injection pressures to improve longevity of unit injector components. *pe
Bulletin:
SB-21-5035
Component:
062200 engine and engine cooling:cooling system:fan
Summary:
Mack truck: revised fan hub mounting bolt torque. for this application only, the fan hub mounting stud material properties and length have been changed to 45mm (was 40mm) to ensure full nut engagement. model years unknown. *
Bulletin:
SB-22499
Component:
103600 power train:automatic transmission:cooling unit and lines
Summary:
Mack truck: the transmission oil cooler coolant supply piping arrangement may prevent installation of a driveshaft to an accessory pump with the transmission mounted pto located in the 8 o'clock position. model years unknown.
Bulletin:
SB-215035
Component:
061200 engine and engine cooling:engine:diesel
Summary:
Mack truck: revised fan hub mounting bolt torque. for this application only, the fan hub mounting stud material properties and length have been changed. stud material is now grade 10.8 (previously was grade 8.8), and the stud length has bee
Bulletin:
TSB-517009
Component:
106000 power train:axle assembly
Summary:
Mack truck: broken longitudinal torque rod mounting stud in axle spring seat due to wing bracket interference. this includes the td model. no model years listed. *pe
Bulletin:
SB-735006
Component:
046400 service brakes, air:antilock:abs warning light
Summary:
Mack truck: mack road stability advantage (rsa) enhancements. no model years listed. *pe
Bulletin:
PI-0676
Component:
012000 steering:column
Summary:
Mack truck: steering column locking mechanism inspection and adjustment. on certain cxu, chu, gu and td models, the steering column may not remain locked in the desired tilted position. to correct this condition the steering column lock
Bulletin:
SB-313006
Component:
101000 power train:clutch assembly
Summary:
Mack truck: air assist clutch conversion. air assist to non assist clutch cable conversion. the air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave
Bulletin:
SB-635012
Component:
353600 equipment:air conditioner
Summary:
Mack truck: fine particulate filter for hvac units-cxu, chu, gu, cxp and ctp models. a pleated fine particulate hvac filter (part no. 85112361) has been developed for the hvac units in certain models. no model years listed.
Bulletin:
SB-631002
Component:
131000 visibility:windshield
Summary:
Mack truck: windshield installation (rope-pull method)-cxu, chu, gu, cxp, ctp, cxn, chn, cx, ch, ct, cv and cl models. mack trucks now uses a rope pull windshield glass installation method on current production conventional models. thi
Bulletin:
SB-313004
Component:
101000 power train:clutch assembly
Summary:
Mack truck: revised air assist clutch cable. effective 9/17/07, a revised air assist clutch cable (part no. 27rc410m) was implemented into production on cxu, chu, and gu model chassis. no model years listed. *pe
Bulletin:
PI-0686
Component:
118000 electrical system: software
Summary:
Mack truck: pto function inoperable. the pto on certain chu, cxu, gu and td model chassis will not function. the cause is due to a software issue in the vehicle electronic control unit (vecu) as well as some incorrect parameter settings
Bulletin:
SB-730002
Component:
040000 service brakes, air
Summary:
Mack truck: sensor, adaptive cruise with braking (acb), alignment. this bulletin contains information for checking the alignment and adjusting the adaptive cruise with braking (acb) sensor found on cxu, chu, gu and td model mack trucks.
Bulletin:
SB-730003
Component:
114000 electrical system:wiring
Summary:
Mack truck: chassis wiring harness, acb sensor, replacement. this bulletin contains information for the replacement of the adaptive cruise with braking (acb) sensor chassis overlay wiring harness, found on cxu, chu, gu and td model mack t
Bulletin:
SB-535003
Component:
050000 parking brake
Summary:
Mack truck: parking brake alert. the new alert is meant to inform the vehicle operator that the parking brake has not been apply while attempting to exit the vehicle. models cxu, chu, gu, and td. no model years listed. *pe
Bulletin:
SB-PI-0691
Component:
061120 engine and engine cooling:engine:gasoline:turbo-charger
Summary:
Mack truck: replacement of the turbocharger and mounting hardware on certain mp8 engine equipped trucks. the turbocharger and associated mounting hardware must be changed on all trucks involved in this campaign. *pe
Bulletin:
PI-0684
Component:
118000 electrical system: software
Summary:
Mack: low nox idle, does not function with hand throttle. the electronic hand throttle on certain chu, cxu, gu and td model chassis when engaged, will override the low nox idle compliance. a list of affected chassis has been sent to all
Bulletin:
FSB-851-007
Component:
220000 seats
Summary:
Mack truck: rear trim panel wear plate, installation. model chassis equipped with high back or mid back seats, the seat back can rub and wear through the rear trim panel. does not apply to chassis equipped with sears brad seats. models c
Bulletin:
SP-284-027
Component:
118000 electrical system: software
Summary:
Mack truck: engine ecm and acm software updates. enhancements are available for the engine control module (ecm) and aftertreatment control module (acm). does not apply to mack trucks australia. models mru, leu, gu, chu, cxu. no model y
Bulletin:
SB-810-002
Component:
061200 engine and engine cooling:engine:diesel
Summary:
Mack truck: cab/dashboard panel cracks may form due to excessive cab flexing during extreme use of the trucks. *rm
Bulletin:
SB-465-001
Component:
355200 equipment:other:owners/service/other manual
Summary:
Mack trucks: there are new revised torque procedures to prevent the bull gear mounting screws from loosening. *rm
Bulletin:
PI-0695
Component:
102000 power train:manual transmission
Summary:
Mack truck: the oil slinger threads on the input shaft of the transmission were threaded incorrectly and could cause leakage in the area. *rm
Bulletin:
SB-263-046
Component:
062200 engine and engine cooling:cooling system:fan
Summary:
Mack: fan rings are cracking during extreme service. *rm updated 9/7/11. *pe
Bulletin:
SP-252-002
Component:
063140 engine and engine cooling:exhaust system:emission control:catalytic convertor
Summary:
Mack: procedure to fix the an insulation blanket in the exhaust system that can deteriorate over time. *rm updated 9/12/11. *pe
Bulletin:
SP-252-001
Component:
063200 engine and engine cooling:exhaust system:manifold/header/muffler/tail pipe
Summary:
Mack: procedure to fix the an insulation blanket in the exhaust system that can deteriorate over time. *rm updated 9/12/11. *pe
Bulletin:
SP-652-006
Component:
980000 unknown or other
Summary:
Mack trucks: torque rod to mounting bracket bolts were installed incorrectly. the bolts were installed in an opposing manner. *rm
Bulletin:
SP-218-001
Component:
060000 engine and engine cooling
Summary:
Mack trucks: there are four missing bolts in the engine frame and mount. *rm updated on 4/22/2013. *kb
Bulletin:
FSB-293-011
Component:
062300 engine and engine cooling:cooling system:hose
Summary:
Mack trucks: there are new egr outlet hose clamps. *rm
Bulletin:
FSB-491-029
Component:
980000 unknown or other
Summary:
Mack trucks: there are cracks in a steel oil tube that can lead to leaking. *rm updated 2/21/12. *pe
Bulletin:
SP-430-001
Component:
102200 power train:manual transmission:floor shift assembly
Summary:
Mack trucks: the transmission shift instruction label has been updated. *rm
Bulletin:
FSB-370-001
Component:
111100 electrical system:battery:cables
Summary:
Mack trucks: the diagnostic connector may become loose. information on replacement of the diagnostic retainer clip. *rm
Bulletin:
SP-284-030
Component:
061000 engine and engine cooling:engine
Summary:
Mack trucks: there are engine ecm software updates. *rm
Bulletin:
SP-372-010
Component:
115000 electrical system:fuses and circuit breakers
Summary:
Mack trucks: the fuse identification decal is being corrected. *rm
Bulletin:
SP-365-001
Component:
101100 power train:clutch assembly:pedal/linkage
Summary:
Mack: clutch operation error prevents starter engagement unless pedal is fully depressed. *rm
Bulletin:
FSB-844-003
Component:
132000 visibility:glass, side/rear
Summary:
Mack truck: passenger door peep window is loosening from door. this may result in the window butyl tape softening because of high temperatures. *pe
Bulletin:
FSB-652-004-1
Component:
022520 suspension:rear:axle:non-powered axle assembly
Summary:
Mack: torque rod replacement on front rear axle. *js updated 5/9/12. *pe
Bulletin:
FSB-258-031
Component:
071120 fuel system, gasoline:storage:tank assembly:mounting
Summary:
Mack: on certain mack vehicles built before 2/13/2012, the front chassis to urea tank connection, located on the side of the def tank may rub mounting bracket or not stay secured. *js
Bulletin:
PI0783
Component:
020000 suspension
Summary:
Mack trucks: frame flange contacting suspension crossmember. certain mack models may have contact issues between the frame rails and cross member. this contact can cause a side loading condition to the frame. *js
Bulletin:
FSB-255-023
Component:
061000 engine and engine cooling:engine
Summary:
Mack trucks: severe fretting damage of the engine variable geometry turbocharger actuator (engine vgt actuator) harness and turbine shaft speed sensor (tss) connectors may cause an unreliable signal to the engine vgt actuator. also include
Bulletin:
FSB-212-002
Component:
061000 engine and engine cooling:engine
Summary:
Mack trucks: oil seepage at flywheel housing. this problem has already been solved in production, but the production solution is not compatible with previous generation flywheel housings. *js
Bulletin:
FSB-234-014-1
Component:
091100 fuel system, other:storage:tank assembly
Summary:
Mack: on the right side of truck, is the mounted stanchion exhaust bracket and fuel vent lines, which the fuel tank ventilation filter is added. models chu, cxu, gu, td, mp7, mp8, mp10, us07, us10. model years 2008-2012. *pe
Bulletin:
FSB-255-024-03
Component:
061320 engine and engine cooling:engine:other fuel types:turbo-charger
Summary:
Mack: an unreliable signal to engine vgt actuator from engine variable geometry turbocharger (vgt) actuator harness that has severe fretting damage, the connector pin and socket contacts should be replaced. *pe updated 9/17/12.
Bulletin:
PI-0780
Component:
022144 suspension:rear:springs:leaf spring assembly:u-bolt, leaf spring to axle
Summary:
Mack: during extreme downward articulation of rear axle, the air spring may separate at mounting bell. *pe
Bulletin:
PI-0781
Component:
060000 engine (pws)
Summary:
Mack: due to fretting of connector pins in engine vgt actuator connector, a new mounting arrangement has been developed and relocation of engine vgt actuator connector. models chu, cxu, gu, mru, mp8. *pe updated 7/31/12.
Bulletin:
PI-0789
Component:
021231 suspension:front:springs:air suspension:lines and fittings
Summary:
Mack truck: information regarding the sleeper cab suspension leveling valve bracket that was installed incorrectly. also, the support bracket for air spring, incorrectly mounted on frame, causing cab shock to extend fully when air sprin
Bulletin:
FSB-258-033
Component:
061120 engine and engine cooling:engine:gasoline:turbo-charger
Summary:
Mack trucks: engine tubocharger compressor bypass valve, airline routing. this document covers the procedure for routing the flexible air line around the front of the engine if the existing steel air line fail. *js
Bulletin:
FSB-293-007
Component:
091130 fuel system, other:storage:tank assembly:pressure relief devices
Summary:
Mack trucks: egr differential pressure sensor pin fretting. severe fretting damage of the engine exhaust gas recirculation differential pressure sensor's (egr differential pressure sensor) connector may cause an unreliable signal to the sen
Bulletin:
FSB-372-011
Component:
125000 exterior lighting:brake lights
Summary:
Mack trucks: four way flasher abs fault. certain vehicles equipped with a webb solid state flasher, built from jan. 1, 2010 to june 29, 2012 may experience an active abs fault when the 4 way flasher is enabled. *js
Bulletin:
PI-0796
Component:
063130 engine and engine cooling:exhaust system:emission control:gas recirculation valve (egr valve)
Summary:
Mack truck: information provided regarding modification of egr valve on engines and removal of poppet shaft end cap o rings. models chu, cxu, gu, leu, mru. no model years listed. *pe
Bulletin:
PI-0801
Component:
091100 fuel system, other:storage:tank assembly
Summary:
Marck truck: information regarding two upper huck bolts for fuel tank j bracket and aftertreatment control module (acm). to provide necessary clearance, if interference exists, cut off end of huck bolts and remove acm. models gu. no mo
Bulletin:
PI-0767
Component:
021500 suspension:front:control arm
Summary:
Mack trucks: slack adjuster control arm. haldex slack adjusters and ridewell suspension may exhibit a condition which allows the slack adjuster control arm to make contact with the ridewell suspension walking beam during steep suspension ar
Bulletin:
PI-0812
Component:
022000 suspension:rear
Summary:
Mack trucks: rear suspension adjustment washers. replacement of the suspension adjustment washers is required. *js
Bulletin:
PI-0815
Component:
020000 suspension
Summary:
Mack trucks: rear suspension hardware torque. bolts are loose or incorrectly torqued on the primaax suspension. *js updated 07/18/2013 *js
Bulletin:
FSB-221-010
Component:
060000 engine (pws)
Summary:
Mack trucks: low oil pressure. stored dtc spn 100 fmi 1, during long hard pull conditions. *js
Bulletin:
FSB-364-036
Component:
110000 electrical system
Summary:
Mack truck: flashers are to be removed due to durability issues. *js
Bulletin:
FSB-873-015
Component:
353600 equipment:air conditioner
Summary:
Mack trucks:due to excessive moisture in the climate unit, some vehicles may develop a blower motor failure. *js
Bulletin:
FSB-413-001
Component:
101000 power train:clutch assembly
Summary:
Mack trucks: the air assisted clutch cable on some vehicles may fray at the clevis. *js
Bulletin:
FSB-284-047
Component:
114000 electrical system:wiring
Summary:
Mack: on some trucks, oil contamination into engine wire harness, may be from oil level sensor failure and an anti wicking pigtail splice kit is available. model chu, cxu, gu, leu, mru, td. no years listed. *pe
Bulletin:
FSB-831-002
Component:
162310 structure:body:door:hinge and attachments
Summary:
Mack: the door stop bracket will fail, on some trucks, due to an over extension of door, but a new door design assembly is available. model chu, cxu, gu, td. no years listed. *pe
Bulletin:
FSB-284-048
Component:
060000 engine (pws)
Summary:
Mack truck: due to oil contamination into engine wire harness, main oil gallery pressure sensor or piston cooling jet pressure sensor has failed and new anti wicking jumper harness is available to stop oil from wicking back and causing dam
Bulletin:
FSB-234-019
Component:
071210 fuel system, gasoline:storage:auxillary tank:selector devices
Summary:
Mack truck: mounted outside of frame rail, is new fuel tank ventilation filter mounting sleeve, using fuel tank j bracket huck fasteners and to increase protection against fuel injector tip erosion. model chu, cxu, gu, td. *pe
Bulletin:
FSB-593-013
Component:
350000 equipment
Summary:
Mack truck: the grade gripper feature, on some trucks, are prone to harsh environments with internal contamination, caused by build up of grime, salt, road debris and other contaminants. model chu, cxu, gu, td. *pe
Bulletin:
FSB-234-018
Component:
091100 fuel system, other:storage:tank assembly
Summary:
Mack truck: to increased protection against fuel injector tip erosion, a new fuel tank ventilation filter was implemented, and mounts on outside of frame rail, using fuel tank j bracket huck fasteners. model chu, cxu, gu, td.
Bulletin:
FSB 371-047
Component:
110000 electrical system
Summary:
Power wires, rerouting, certain mack chu, cxu, gu, and td truck models built between 01/01/07 and 10/22/13, utilizes two (red) power wires that route from the bussed electrical center (bec) and behind the radio. the (red) power wires could
Bulletin:
FSB 722-002
Component:
030000 brakes (pws)
Summary:
Interference between the brake lining and the spring cap was discovered on some mack chu, cxu, gu, td, leu, mru trucks equipped with 203 mm (8 in) rear drum brakes and camelback rear suspension.
Bulletin:
FSB 371-048
Component:
012000 steering:column
Summary:
Cab harness insulation, installation. cab wiring harness may experience chafing.
Bulletin:
FSB 284-048
Component:
060000 engine (pws)
Summary:
Some mack vehicles with mp engines built between january 2004 and january 2013 may experience a main oil gallery pressure sensor or piston cooling jet pressure sensor failure that leads to oil contamination into the engine wire harness.
Bulletin:
FSB 284-047
Component:
060000 engine (pws)
Summary:
Some mack vehicles built between 2004 and october 2013 experience an oil level sensor failure that leads to oil contamination into the engine wire harness.
Bulletin:
FSB 381-045
Component:
117000 digital instrument panel
Summary:
Instrument cluster reprogramming, vehicle built from jan. 1, 2007 to sept. 3, 2012, may experience an increase of parasitic battery drain with key off.
Bulletin:
FSB 284-047
Component:
060000 engine (pws)
Summary:
Some mack vehicles built between 2004 and october 2013 experience an oil level sensor failure that leads to oil contamination into the engine wire harness.
Bulletin:
FSB 213-002
Component:
060000 engine (pws)
Summary:
In some instances the exhaust rocker piston cap screw may become loose and back out causing loss of engine compression, or a mechanical injector diagnostic trouble code (dtc).
Bulletin:
FSB 642-002
Component:
010000 steering
Summary:
Certain gu trucks equipped with forward steer axles (18,000 lb rated front axles) and built before 2012, may experience issues with static steering while sitting still. there is not enough ability with a single steering gear to overcome cer
Bulletin:
K53510452
Component:
070000 fuel system, gasoline
Summary:
Expired - refer to k93039325 - mack chassis - snm16-032 def (diesel exhaust fluid) contamination in diesel fuel.new solution released with improved information
Bulletin:
K77864401
Component:
070000 fuel system, gasoline
Summary:
Mack chassis - diesel exhaust fluid ( def ) system cleaning/flush after a pump failure or system contamination.removed tech tip, added correct operation id
Bulletin:
K42708399
Component:
117000 digital instrument panel
Summary:
Diagnostic trouble code ( dtc ) p0422 lighting the malfunction indicator light ( mil ) - obd15 and obd16 chassis (non-common rail).updated to reflect release of fsb284-064 (above)
Bulletin:
K84412328
Component:
117000 digital instrument panel
Summary:
Diagnostic trouble code ( dtc ) p249c intermittently lighting the malfunction indicator lamp ( mil ) - obd15 and obd16, model year ( my ) 2016 and 2017 chassis.updated to reflect release of fsb284-064 (above)
Bulletin:
K03179378
Component:
073100 fuel system, gasoline:fuel injection system:fuel rail
Summary:
Service only regen requested with no warning. diagnostic trouble codes ( dtc ) p24a4 / p10fe active or inactive with several counts - obd15 and obd16 conventional chassis; does not apply to us17 (common rail fuel system) chassis.updated to
Bulletin:
K86412082
Component:
117000 digital instrument panel
Summary:
Engine diagnostic trouble codes ( dtc's ) p24a0 and p249f lighting the malfunction indicator lamp ( mil ) - obd15 (commonly model year 2016) and newer.updated to reflect release of fsb284-064 (above)
Bulletin:
K45941512
Component:
062000 engine and engine cooling:cooling system
Summary:
Mack chassis - diagnostic trouble code ( dtc ) p0128, diagnostic and repair - us14+obd13 (commonly year model 2015) and newer.updated to reflect release of fsb284-064 (above)
Bulletin:
K86094641
Component:
060000 engine (pws)
Summary:
Mack chassis - diagnostic trouble code ( dtc ) p226c intermittently lighting the malfunction indicator lamp ( mil ) - obd15 and obd16 conventional chassis.updated to reflect release of fsb284-064 (above)
Bulletin:
K82320750
Component:
101000 power train:clutch assembly
Summary:
Automated manual transmission ( amt - f ) ( mdrive ) clutch valve unit ( cvu ) makes intermittent buzzing noise with the key on and engine off.changed repair information to reflect new software available.
Bulletin:
K43056254
Component:
063100 engine and engine cooling:exhaust system:emission control
Summary:
Mack chassis - aftertreatment control module ( acm ) not visible in premium tech tool ( ptt ).added more checks and procedures
Bulletin:
K14701433
Component:
091130 fuel system, other:storage:tank assembly:pressure relief devices
Summary:
Diagnostic trouble code ( dtc ) p009e - 73 - fuel pressure relief control performance / stuck off - ghg17 ( us17 ) chassis with common rail fuel system.changed repair instructions to reflect new procedures
Bulletin:
FSB284064
Component:
060000 engine (pws)
Summary:
Ecm and acm reprogramming, obd2015
Bulletin:
K58557784
Component:
070000 fuel system, gasoline
Summary:
Fuel injector offset learning diagnostic trouble codes ( dtc ) / fault codes logged in engine control module ( ems ); possible rough / uneven idle - obd15 chassis
Bulletin:
K14701433
Component:
118000 electrical system: software
Summary:
Diagnostic trouble code ( dtc ) p009e - 73 - fuel pressure relief control performance / stuck off - ghg17 ( us17 ) chassis with common rail fuel system, updated to reflect ghg17 software release
Bulletin:
K04342327
Component:
355200 equipment:other:owners/service/other manual
Summary:
Diagnostic trouble code ( dtc ) p0420 illuminating the malfunction indicator lamp (mil) - us17 (ghg17, common rail fuel system) chassis only
Bulletin:
K01050303
Component:
355200 equipment:other:owners/service/other manual
Summary:
Diagnostic trouble code ( dtc ) p0471 illuminating the malfunction indicator lamp (mil) - us17 (ghg17, common rail fuel system) chassis only
Bulletin:
K47547856
Component:
353000 equipment:electrical
Summary:
Particulate matter ( pm ) sensor diagnostic trouble codes ( dtc ) illuminating the malfunction indicator lamp ( mil ); tech tip tt-014-2016 - obd16 and newer emissions (commonly model year 2017, includes common rail fuel system chassis), re
Bulletin:
K72614548
Component:
110000 electrical system
Summary:
Diagnostic trouble code ( dtc ) p02fa illuminating the malfunction indicator lamp (mil) - us17 (ghg17, common rail fuel system) chassis only

Home | Privacy