2000 FERRARI 360 MODENA Recall

Campaign:
00V340000 on 10/26/2000
Component:
Power train:clutch assembly
Manufactured:
11/30/1998 - 05/30/2000
Affected:
568
Defect:
Vehicle description: passenger vehicles. the starter ring gear, which is attached to the clutch assembly with three mounting screws, could become separated from the clutch assembly. this possible failure could be caused by (1) the fracture of the starter ring gear itself at the mounting holes due to an incorrect positioning of the mounting holes, or (2) by the failure of the mounting screws. if either of these conditions would occur, the result would be fragments of the starter ring gear being thrown from the clutch area.
Consequence:
If these fragments came into contact with the vehicle's tire, a puncture could occur resulting in loss of vehicle control.
Correction:
Dealers will (1) replace the starter ring gear mounting screws and measuring the starter ring gear mounting holes. the measurement of the starter ring gear will determine if the correct position of the mounting holes exists and if the position is incorrect, the starter ring gear will also be replaced; or (2) replace the starter ring gear with a new ring gear having the correctly positioned mounting holes and the replacement of the mounting screws.
Notes:
Owner notification began october 31, 2000.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ferrari at 1-201-816-2651.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

2000 FERRARI 360 MODENA TSBs (6)

Bulletin:
859
Component:
013000 steering:gear box (other than rack and pinion)
Summary:
Information on tools for mounting the steering box. *tt
Bulletin:
883
Component:
110000 electrical system
Summary:
Subject regarding distribution of 128 pin interconnector for motronic 7.3. *tt
Bulletin:
891
Component:
020000 suspension
Summary:
Subject regarding tools av3281 - av3282 for installing and removing flamblock bushings in suspension levers. *tt
Bulletin:
892
Component:
021300 suspension:front:shock absorber
Summary:
Subject regarding tool av3304 for the replacement of the bump stop bushing on the shock absorber. *tt
Bulletin:
896
Component:
101000 power train:clutch assembly
Summary:
Subject regarding f1 clutch control. *tt
Bulletin:
901
Component:
350000 equipment
Summary:
Subject regarding modification to the tool av 3260. *tt

Home | Privacy