1999 KENWORTH T2000 Recalls (8)
- Campaign:
- 99V181001 on 07/13/1999
- Component:
- Electrical system:ignition:module
- Manufactured:
- 11/30/1998 - 06/29/1999
- Affected:
- 272
- Defect:
- Vehicle description: heavy duty trucks equipped with caterpillar engines and eaton autoshift transmissions. the engines can stall because of software problems.
- Consequence:
- Increased steering effort can occur.
- Correction:
- Dealers will update these engines with software changes. caterpillar is conducting the owner notification and remedy of this recall.
- Notes:
- owner notification is expected to begin during august 1999.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-206-828-5418 or peterbilt at 1-940-591-4000.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
- Campaign:
- 00V026000 on 02/03/2000
- Component:
- Service brakes, air:supply:quick release valve
- Manufactured:
- 08/29/1999 - 01/13/2000
- Affected:
- 2,268
- Defect:
- Vehicle description: heavy duty trucks equipped with brake valves manufactured by honeywell bendix. the orientation and location of the brake valve is such that water can get into the valve through a vent in the valve. the water will contaminate the air system and could freeze the brake valve.
- Consequence:
- If frozen, the operator will not be able to modulate the brake forces with the brake pedal.
- Correction:
- Dealers will inspect the air brake system and modifications will be made to the brake valve.
- Notes:
- Owner notification began february 29, 2000.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at1-206-828-5000. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
- Campaign:
- 00V246102 on 09/20/2000
- Component:
- Steering:linkages:tie rod assembly
- Manufactured:
- 07/06/1999 - 12/02/1999
- Affected:
- 3,260
- Defect:
- Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. the tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
- Consequence:
- This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
- Correction:
- Dealers will remove and replace all affected tie rods and drag links with different designed ends.
- Notes:
- Owner notification began october 6, 2000. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
- Campaign:
- 01V051000 on 02/27/2001
- Component:
- Suspension:front:control arm:lower arm
- Manufactured:
- 02/18/1996 - 02/08/2001
- Affected:
- 209
- Defect:
- Vehicle description: vehicles equipped with 54" rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. the rear suspension is regularly subjected to extreme articulation, resulting in flexing of the joint.
- Consequence:
- Failure of the lower sway arm attaching bolts could result in loss of vehicle control.
- Correction:
- Dealers will replace the lower sway arm brackets. owner notification began march 27, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.
- Notes:
- Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
- Campaign:
- 01V044005 on 03/07/2001
- Component:
- Steering:linkages:tie rod assembly
- Manufactured:
- 07/13/1999 - 09/21/1999
- Affected:
- 6,392
- Defect:
- Vehicle description: heavy duty trucks equipped with tie rod assemblies manufactured by trw. the suspect tie rods contain 24-dl model ball sockets. certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
- Consequence:
- If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
- Correction:
- Dealers will replace the defective ball sockets and/or drag links. owner notification began on april 10, 2001, to kenworth owners and on april 25, 2001, to peterbilt owners. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000, peterbilt at 1-940-591-4000 or trw customer service at 1-866-280-3287.
- Notes:
- Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
- Campaign:
- 01V140006 on 10/16/2001
- Component:
- Steering:linkages:tie rod assembly
- Manufactured:
- 06/22/1999 - 12/14/1999
- Affected:
- 2,294
- Defect:
- Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. the tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
- Consequence:
- This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
- Correction:
- Dealers will remove and replace all affected tie rods and drag links with different designed ends. owner notification began october 24, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.
- Notes:
- Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
- Campaign:
- 02V037003 on 09/11/2002
- Component:
- Steering:linkages:tie rod assembly
- Manufactured:
- 12/10/1999 - 09/29/2000
- Affected:
- 4,513
- Defect:
- Heavy duty trucks equipped with trw tie rod ends on certain arvinmeritor and dana axles. peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from december 11, 1999, to may 14, 2000, and from july 22 to september 30, 2000. kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured from december 11, 1999, to may 23, 2000, and from july 27, 2000, to september 30, 2000 and kennworth will recall an additional 4,151 vehicles equipped with dana axles and manufactured from june 23 to december 6, 1999, and from may 23 to september 30, 2000. the tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
- Consequence:
- This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
- Correction:
- Dealers will remove and replace all affected tie rods and drag links with different designed ends. owner notification began july 15, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4201 or kenworth at 1-425-828-5440.
- Notes:
- Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
- Campaign:
- 03V125000 on 04/14/2003
- Component:
- Suspension:front:hub
- Manufactured:
- 09/01/1998 - 12/05/2001
- Affected:
- 154
- Defect:
- On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
- Consequence:
- Seizure of the bearings can cause wheel separation or wheel end fire.
- Correction:
- Dealers will replace all front axle hubs. notification began july 16, 2003. the manufacturer has advised us that parts will not be available until september 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy with a reasonable time should contact peterbilt at 940-591-4201 or kenworth 425-828-5440.
- Notes:
- Kenworth recall no. 03kw2 and peterbilt recall no. 303-a.customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
1999 KENWORTH T2000 TSBs (2)
- Bulletin:
- 4522
- Component:
- 180000 vehicle speed control
- Summary:
- Conditions with resume function worksing as set function and set works as resume on cruise control. *tt
- Bulletin:
- TIB-44-17
- Component:
- 061200 engine and engine cooling:engine:diesel
- Summary:
- Kenworth trucks: reduced engine power from fuel starvation. any model kenworth equipped with the 2007 emissions compliant isx engine and optional davco 382 fuel filter, built prior to 8/11/08, *pe
Home | Privacy