1987 BUICK LESABRE Recalls (5)
- Campaign:
- 87V093000 on 06/23/1987
- Component:
- Service brakes, hydraulic:antilock
- Manufactured:
- 05/31/1985 - 08/31/1986
- Affected:
- 6,004
- Defect:
- The anti lock brake system (abs) pressure/warning switch may exhibit brake fluid seepage which eventually can lead to loss of the brake system hydraulic pump motor. additionally, the hydraulic pump motor and abs electrical relays may have been exposed to water contamination during vehicle assembly. this condition can cause loss of the hydraulic pump motor and/or loss of the abs function.
- Consequence:
- Loss of the hydraulic pump motor would result in a totalloss of rear brakes as well as power assist to the front brakes. the red brakewarning light would illuminate and stay on. if this warning is not heeded, aloss of rear brakes at a time when minimum stopping distance is required couldresult in a vehicle crash. an inoperative abs electrical relay could causeloss of the abs function, but normal power assisted braking would be retained.the amber anti lock warning light would illuminate and stay on.
- Correction:
- The abs and hydraulic pump motor electrical relays and 30 amp fuses will be replaced. in addition, the hydraulic pump motor assembly and pressure/warning switch will be inspected and, if required, replaced.
- Notes:
- System: brakes.vehicle description: passenger cars with anti lock brakes.
- Campaign:
- 87V135000 on 09/02/1987
- Component:
- Electrical system:fuses and circuit breakers
- Manufactured:
- 07/31/1986 - 04/30/1987
- Affected:
- 479,715
- Defect:
- An in line fusible link may melt down and cause a fire.
- Consequence:
- The in line fusible link located in the area of theplastic windshield washer bottle bracket may, under a high resistance load,melt down and ignite the washer bottle bracket resulting in an enginecompartment fire.
- Correction:
- The windshield washer bottle bracket will be replaced.
- Notes:
- System: electrical/in line fusible link.vehicle description: passenger cars
- Campaign:
- 88V067000 on 04/21/1988
- Component:
- Service brakes, air:antilock
- Manufactured:
- 05/31/1986 - 12/31/1987
- Affected:
- 1,889
- Defect:
- Low torque of the brake hydraulic unit mounting bolts could cause increased brake pedal travel and/or poor pedal feel if attachment loosens.
- Consequence:
- This condition could lead to separation of brakehydraulic unit from its mounting bracket and result in loss of brake functionand an accident.
- Correction:
- Replace hydraulic unit mounting bolts.
- Notes:
- System: brakes.vehicle description: passenger cars equipped with anti lock brake system.
- Campaign:
- 89V102000 on 07/24/1989
- Component:
- Vehicle speed control
- Manufactured:
- 07/31/1983 - 01/31/1988
- Affected:
- 1,755,897
- Defect:
- A small nylon bushing in the cruise control servo bail may slip out of place, causing intermittent and unexpected increases in engine speed or dieseling (engine run on with ignition off).
- Consequence:
- Servo rod assembly could catch on engine components andresult in a stuck throttle with potential for a vehicle crash.
- Correction:
- Install a new bushing in cruise control servo bail.
- Notes:
- System:cruise control.vehicle description:passenger vehicles equipped with cruise control andcertain gasoline and diesel engines.
- Campaign:
- 06E043000 on 05/21/2006
- Component:
- Fuel system, gasoline
- Affected:
- 88,303
- Defect:
- Certain replacement fuel filters, fram brand name p/n g3727, with date codes x52911 through x60801 sequentially or x600141 and a mexico country or origin marking on the fuel filter housing manufactured from october 18, 2005, through march 21, 2006, sold for use on the vehicles listed above and on certain school buses. (to see the school bus engine sizes, click on "document search" and then "bus applications"). the connector on the fuel filter was not manufactured to honeywell's specification. as a result, the o-ring may not seat correctly on the fuel line.
- Consequence:
- This condition may cause an inadequate seal at the connection, potentially leading to a fuel leak. in the presence of an ignition source, a fire could occur.
- Correction:
- Honeywell will notify owners and replace the fuel filters free of charge. the recall began on october 18, 2006. owners may contact fram customer service at 1-800-890-2075 (option 1).
- Notes:
- This recall only pertains to aftermarket fram fuel filters and has no relation to any original equipment installed on the vehicles listed.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
Home | Privacy