1983 INTERNATIONAL HARVESTER S1700 Recalls (6)

Campaign:
83V001000 on 01/16/1983
Component:
Steering:gear box (other than rack and pinion)
Manufactured:
10/31/1976 - 11/30/1982
Affected:
3,500
Defect:
Under certain circumstances, the output shaft of the steering gear may develop cracks at a location between the gear and the pitman arm mounting. the suspect component is found on steering gears with the code 05057. continued operation may result in fracture and disconnection of the steering linkage.
Correction:
The dealer will remove original output shaft from steering gear and replace it with a new case-hardened shaft free of charge.
Notes:
Vehicle description: heavy trucks equipped with 9000 lb front axle.system: steering system; steering gear output shaft.consequences of defect: the pitman arm transmits steering movements from thesteering gear to the steering linkages. if cracks develop in the output shaftof the steering gear, and the shaft breaks, the pitman arm will detach andsteering control will be lost. loss of vehicle control and an accident canresult.

Campaign:
83V029000 on 04/05/1983
Component:
Service brakes, air:drum:drum
Manufactured:
08/31/1981 - 10/31/1982
Affected:
1,900
Defect:
The 3/4 inch diameter fasteners which join the rear axle brake drum to the wheels were not tightened properly. these fasteners may loosen during vehicle operation, causing damage to the drum and brakes of the wheel.
Correction:
The dealer will inspect and retighten fasteners to specified level and replace damaged components, if necessary.
Notes:
Vehicle description: heavy trucks equipped with 22,000 lb. rear axles or largerand with cast wheels.system: suspension; wheel and drum fasteners.consequences of defect: if the damage were to occur on the rear wheel of avehicle equipped with air brakes, the distance required to stop the vehiclecould be increased significantly. if damage were to occur on a vehicle equippedwith hydraulic brakes, a total loss of the vehicle"s braking capability couldresult in a crash without prior warning.

Campaign:
83V075000 on 08/29/1983
Component:
Steering:linkages:tie rod assembly
Manufactured:
04/30/1983 - 05/31/1983
Affected:
1,318
Defect:
The nuts that mount the tie rod ends to the steering arms may not have been securely fastened; the nuts could loosen and eventually fall off. also, tie rod tubes on some axle assemblies may be too short. either condition could lead to a separation of the tie rod from the steering arm.
Correction:
Upon inspection, nuts will be tightened to meet specifications and any undersized tie rod tubes will be replaced.
Notes:
Vehicle description: medium buses, trucks, truck-tractors.system: steering; tie rod end nuts and tie rod tubes.consequences of defect: loss of steering control would occur without priorwarning, possibly resulting in an accident and personal injury.

Campaign:
83V127000 on 01/11/1984
Component:
Steering:hydraulic power assist:hose, piping, and connections
Manufactured:
03/31/1980 - 08/31/1983
Affected:
1,387
Defect:
Within the steering system, high operating temperatures may cause eventual deterioration of the hose which returns power steering fluid to the pump. the hose may rupture and power steering assist will be lost.
Correction:
Dealer will replace the power steering hose and install a heat shield between the engine and hose at no charge.
Notes:
Vehicle description: heavy trucks equipped with v-392 engine and powersteering.system: steering; power steering return hose.consequences of defect: a ruptured line may spray atomized steering fluid onengine manifold without warning, possibly resulting in a fire and personalinjury.

Campaign:
85V037000 on 04/15/1985
Component:
Steering:linkages:knuckle:spindle:arm
Manufactured:
07/31/1977 - 09/30/1984
Affected:
31,746
Defect:
The steering arm may crack after repeated full-lock turns. consequence of defect: if cracks progress to complete fracture of the arm, steering control would be lost and a vehicle accident could occur.
Correction:
Replace steering arm with redesigned strengthened arm.
Notes:
Vehicle description: phase ii trucks and buses with 10,800 and 12,000 pound capacity front axles and ross power steering.system: steering arm.

Campaign:
86V026000 on 02/25/1986
Component:
Steering:linkages:arm:idler and attachment
Manufactured:
08/31/1977 - 04/30/1985
Affected:
120,292
Defect:
Steering arm may crack after repeated full lock turns due to the lack of end-of-travel relief features. consequence of defect: loss of steering control would be experienced if cracks expand to complete fracture of the arm, and a crash could occur without prior warning.
Correction:
Replace steering arm with a redesigned strengthened arm.
Notes:
System: steering arm. vehicle description: trucks and buses equipped with power steering and 5,000 to 8,000 lb. capacity front axles.

Home | Privacy