1977 CHEVROLET C10 Recalls (3)
- Campaign:
- 77V171000 on 10/11/1979
- Component:
- Suspension:front
- Affected:
- 17
- Defect:
- The involved vehicles were assembled with a standard front suspension assembly, instead of the specified heavy-duty front suspension. operation of vehicle while carrying the maximum rated load may lead to deterioration and eventual failure of front suspension components.
- Correction:
- Dealer will install the proper front suspension components without charge to owner.
- Notes:
- Vehicle description: light trucks equipped with rpo f44 and f60 heavy chassisequipment and springs.system: suspension; front suspension.consequences of defect: failure of the front suspension could cause loss ofsteering control without prior warning, and an accident.
- Campaign:
- 77V178000 on 10/11/1979
- Component:
- Vehicle speed control:accelerator pedal
- Affected:
- 330,468
- Defect:
- The accelerator pedal rod in combination with the pedal installed on the involved vehicles may cut through the floor pan rubber mat or carpet into the thick resilient insulation pad underneath during heavy or repeated full throttle applications. as a result, the accelerator pedal rod may catch in the mat or carpet, preventing the throttle from returning to idle when the driver"s foot is removed from the pedal.
- Correction:
- Dealer will install a new accelerator pedal and retainer designed to prevent the accelerator pedal rod from cutting the rubber mat or carpet. this will be performed without charge.
- Notes:
- Vehicle description: light trucks.system: throttle linkages and control; accelerator pedal rod.consequences of defect: in the event that the throttle does not return to idle,the vehicle would not decelerate as expected and loss of vehicle control and anaccident could result.
- Campaign:
- 07E088000 on 10/29/2007
- Component:
- Equipment
- Affected:
- 121,680
- Defect:
- Certain honeywell fram racing brand hp4 and hp8 oil filters that were manufactured from may 25, 2006, through september 14, 2007, and sold for use as replacement equipment for vehicles list above. the affected filters are marked with a date code a61451 through a72571 sequentially. the date code and part number appear on the filter housing. fram racing hp4 and hp8 oil filters not bearing a date code in this range are not affected by this recall. the gasket of the oil filter becomes more pliable under high temperatures and pressures.
- Consequence:
- This condition may cause inadequate sealing and loss of engine oil, possibly resulting in a fire.
- Correction:
- Honeywell will replace the affected oil filters free of charge. the recall began during november 2007. owners can contact fram customer service toll-free at 1-800-890-2075.
- Notes:
- Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
Home | Privacy