1971 NISSAN 510 Recalls (2)

Campaign:: 75V181000 on 10/11/1979
Component:: Fuel system, gasoline:storage:tank assembly:mounting
Affected:: 20,187
Notes:: Datsun campaign no n/a.possibility that a rubber plug and clamp used to closeoff the return line at the fuel line bead may deteriorate and crack.thiswould occur in some environments with high ozone content combined with highambient temperature and low humiditity.should a crack develop, it couldresult in fuel leaking into the rear seat area creating gasoline fumes and afire hazard condition.(correct by inspecting and installing new plug andclamp).
Campaign:: 80V151000 on 12/16/1980
Component:: Fuel system, gasoline:delivery:hoses, lines/piping, and fittings
Manufactured:: 07/31/1970 - 06/30/1973
Affected:: 118,898
Defect:: The rubber plug used to seal off one of the tank outlets may deteriorate under dry, high ozone environmental conditions (particularly high temperatures) allowing fuel leakage.
Correction:: All involved vehicles will have a new clamp and rubber over-plug placed on the existing plug. if the rubber plug is deteriorated, it will also be replaced.
Notes:: Vehicle description: passenger vehicles.system: fuel; return line plug.consequences of defect: should this leakage occur, fuel odors will enter thepassenger compartment, and a vehicle fire and personal injury could occur.

1971 NISSAN 510 TSBs (3)

Bulletin:: NTB-09-030
Component:: 110000 electrical system
Summary:: Nissan: the 12 volt battery is an important part of the vehicle electrical system and is required to stay connected when the engine is running. to prevent damage to vehicle electronic components follow the instructions/cautions. no mod
Bulletin:: NTB-09-101
Component:: 199000 tires:pressure monitoring and regulating systems
Summary:: Nissan: tire pressure monitoring system (tpms) warning light on/flashing. no models or model years listed. *pe updated on 08-11-2011. *kb
Bulletin:: NTB-09-129
Component:: 355200 equipment:other:owners/service/other manual
Summary:: Nissan: vent control valve replacement. when replacing the evap canister vent control valve for reason: use the one listed on page 2; for vent control valve replacement procedure, refer to the appropriate section of the electronic service