9999 SAF-HOLLAND ADL Recall

Campaign:: 08E031000 on 04/13/2008
Component:: Suspension
Affected:: 2,065
Defect:: Saf-holland has reported a safety related defect in 2,065 transverse beam assemblies, p/nos. 90547733, 90547813, and 90548443, installed as original equipment in certain recreational vehicles to aid in providing roll resistance of the drive axle suspension system. in some instances the transverse beam was not properly welded which could result in a failure of the weld.
Consequence:: If the weld fails, vehicle stability while cornering could be affected resulting in loss of vehicle control, possibly resulting in a crash. in addition, the transverse beam could drop to the ground causing sparks that could cause a fire hazard.
Correction:: Each vehicle manufacturer will file a defect report and remedy plan for their vehicles which included these transverse beam assemblies as original equipment. vehicles will be repaired at no cost to the owner. the recall is expected to begin during april 2008. owners can contact either their vehicle manufacturer or saf-holland at 231-773-3271.
Notes:: Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

9999 SAF-HOLLAND ADL TSBs (2)

Bulletin:: SB-024
Component:: 980000 unknown or other
Summary:: Saf-holland: landing gear lubrication. although your landing gear was adequately greased and packed with high quality lubricants when manufactured, it will be necessary to periodically supplement this lubrication to maintain satisfactory
Bulletin:: TA-20004
Component:: 020000 suspension
Summary:: Saf-holland: informational instruction to be used in conjunction with service manual regarding the removal of outer round cam washer and installation of new s cam guide plate for drum brake axles. no models or model years listed.