9999 ALLISON 1000 SERIES TRANSMISSION TSBs (38)

Bulletin:
161K2K01
Component:
103000 power train:automatic transmission
Summary:
Subject regarding c1 selective backplate. *slc
Bulletin:
171K2K01
Component:
103700 power train:automatic transmission:torque converter
Summary:
Subject regarding torque converters interchangeability. *slc
Bulletin:
191K2K01
Component:
102000 power train:manual transmission
Summary:
Subject regarding transpro version 8.53. *slc
Bulletin:
41K2K02
Component:
103100 power train:automatic transmission:control module (tcm, pcm)
Summary:
Subject regarding all 1000 / 2000 / 2400 series tcms using version u02 software. *tt
Bulletin:
281K2K02
Component:
100000 power train
Summary:
Final test specifications, 1000/2000/2400 series transmissions. *tt
Bulletin:
291K2K02
Component:
100000 power train
Summary:
Lube regulator valve spring and converter relief valve spring. *tt
Bulletin:
201K2K00A
Component:
100000 power train
Summary:
Exhaust backfill spring color code. *tt
Bulletin:
301K2K02
Component:
100000 power train
Summary:
Selector shaft and nut design change. *tt
Bulletin:
11K2K03
Component:
100000 power train
Summary:
Introducing allison doc for pda (1000/2000 series) diagnostic tools. *tt
Bulletin:
31K2K03
Component:
100000 power train
Summary:
Implementation of version dee software. *tt
Bulletin:
2008FA-2
Component:
350000 equipment
Summary:
Allison transmission service campaign: see document search button for owner letter. ac current sensor wiring harness replacement installed in dual power inverter modules (dpims) built between 12/22/05 and 3/6/07. have improper shield wire
Bulletin:
2008FA-5
Component:
103100 power train:automatic transmission:control module (tcm, pcm)
Summary:
Allison transmission service campaign: see document search button for owner letter. in some 24 volt 4th gen calibrations the main modulation solenoid may not activate properly at idle; which reduces cooler flow at idle. csc letter was
Bulletin:
TIB-26-18
Component:
103000 power train:automatic transmission
Summary:
Kenworth: automatic transmission will not shift properly, but check transmission warning lamp does not illuminate, and the select and monitor displays do not agree (eg: d selected and n monitor display). chassis equipped with allison 1000
Bulletin:
IK-1300055
Component:
102000 power train:manual transmission
Summary:
International: due to poor shifting quality, too fast upshifting, there is a problem in software calibrations for transmissions on some trucks. allison gen 4 lct (1000, 2000). no years listed.
Bulletin:
ICI-15-001
Component:
102000 power train:manual transmission
Summary:
Daimler trucks (allison transmission) : information provided regarding incorrect calibration of load base shift scheduling (lbss), causing poor performance on certain truck, during normal driving conditions, and need to be recalibrated.
Bulletin:
2012FA06B
Component:
102000 power train:manual transmission
Summary:
Allison transmission released new calibration with lower c5 pressure strategy to prevent friction lost on the c5 friction plate with a higher pressure. *ma updated 02/08/16 *ma
Bulletin:
2012FA06C
Component:
102000 power train:manual transmission
Summary:
Allison transmission notice an issue on the c5 clutch that a higher pressure strategy may cause friction material loss overtime on the friction plate. *ma
Bulletin:
2012FA06D
Component:
102000 power train:manual transmission
Summary:
Allison transmission established that a higher c5 pressure put with the 2010 uprate control may cause friction material over time on the c5 clutch plate. *ma
Bulletin:
WAT-445-REV A
Component:
102000 power train:manual transmission
Summary:
Allison transmission: on certain transmissions, software and calibration changes will occur, permitting neutral at stop function which reduces fuel consumption and improve cooling during idle conditions at stop. model 1000, 2000. *pe
Bulletin:
SIL 13-1K2K-16
Component:
103000 power train:automatic transmission
Summary:
Summary to be provided on a future date.
Bulletin:
SB-2012-FA-06A-B
Component:
101000 power train:clutch assembly
Summary:
Summary to be provided on a future date.
Bulletin:
SB-2012-FA-06B-A
Component:
101000 power train:clutch assembly
Summary:
Summary to be provided on a future date.
Bulletin:
SIL 10-1K2K-09 D
Component:
103000 power train:automatic transmission
Summary:
Summary to be provided on a future date.
Bulletin:
SIL 25-1K2K-16
Component:
100000 power train
Summary:
Announces release of remanufactured tcm for 1000/2000 series transmissions with 3rd generation control systems and the part number.
Bulletin:
2015FA11REVA
Component:
100000 power train
Summary:
Action to enable neutral-at-stop feature in vehicles in which the feature was disabled by the vehicle manufacturer
Bulletin:
SIL-36-TR-16
Component:
100000 power train
Summary:
Bulletin announcing enabling dtc for invalid communication link
Bulletin:
SIL 44-TR-16
Component:
118000 electrical system: software
Summary:
Provides troubleshooting tips for dtc p0642
Bulletin:
TT8008EN Rev B
Component:
103100 power train:automatic transmission:control module (tcm, pcm)
Summary:
Advises service channel to reflash tcm if dtc p2789 is triggered for specific serial numbers
Bulletin:
SIL 5-1K2K-17
Component:
100000 power train
Summary:
Announces a new turbine shaft design and explains it is backwards compatible with the previous design
Bulletin:
TT7994EN
Component:
100000 power train
Summary:
Provides service tip if dtc code is triggered
Bulletin:
SIL 10-TR-99EN R
Component:
100000 power train
Summary:
Details transmission fluid types and service intervals.
Bulletin:
TT8008EN
Component:
100000 power train
Summary:
Advises services to reflash tcm if dtc p2789 is triggered.
Bulletin:
TT7947EN
Component:
103100 power train:automatic transmission:control module (tcm, pcm)
Summary:
Details service procedure to ensure the tcm has the correct calibrations.
Bulletin:
TT8008EN Rev A
Component:
103100 power train:automatic transmission:control module (tcm, pcm)
Summary:
Advises services to reflash tcm if dtc p2789 is triggered.
Bulletin:
SIL 24-TR-13 Rev
Component:
103100 power train:automatic transmission:control module (tcm, pcm)
Summary:
Announces tcm calibration update regarding dtc code that is falsely tripped.
Bulletin:
GPRN 2017-01 Rev
Component:
100000 power train
Summary:
Announces release of new calibrations for transmission software.
Bulletin:
SIL 14-1K2K-17
Component:
103700 power train:automatic transmission:torque converter
Summary:
Introduces new torque converter design for the low rate damper and gives servicing instructions
Bulletin:
TT 8056
Component:
103000 power train:automatic transmission
Summary:
Tip for diagnosing tripped diagnostic code and refers the vehicle to the engine manufacturer

Home | Privacy