9999 AGILITY FUEL SYSTEMS CNG FUEL TANK Recalls (2)
- Campaign:
- 14E026000 on 05/20/2014
- Component:
- Fuel system, other:storage:tank assembly:mounting
- Manufactured:
- 08/31/2010 - 01/30/2013
- Affected:
- 440
- Defect:
- Agility fuel systems (agility) is recalling certain compressed natural gas (cng) tank rail mount systems manufactured september 2010 through january 2013. the affected mounting systems may allow the cng tank to rotate or move within the mounting system which could damage the fuel and vent lines.
- Consequence:
- If the high-pressure fuel and vent lines may become damaged, a fuel leak may result, increasing the risk of a fire. additionally, the fuel line may become pinched disrupting the flow of fuel to the engine, increasing the risk of a stall.
- Correction:
- Agility will notify owners, and agility field personnel will install revised stainless steel mounting straps, hardware and rubber isolators. the recall began in early july 2014. owners may contact agility customer service at 1-949-236-5520.
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
- Campaign:
- 14E025000 on 05/20/2014
- Component:
- Fuel system, other:storage:tank assembly
- Manufactured:
- 08/31/2010 - 01/30/2013
- Affected:
- 263
- Defect:
- Agility fuel systems (agility) is recalling certain compressed natural gas (cng) fuel tank systems manufactured september 2010 through january 2013. in the affected fuel systems, due to a separation of the valve seat from the valve stem, the manual tank shutoff valve can get internally stuck in the closed position while being opened, although the knob may indicate that the valve is open.
- Consequence:
- If the valve is stuck closed, the flow of fuel would be blocked from the fuel container to the engine. such a condition poses a safety risk to service personnel as there is no safe way to depressurize the fuel system and service the subject valve when it is stuck in the closed position, increasing the risk of injury to the service personnel. the affected fuel container may also become over-pressurized if the stuck valve goes undetected for a period of time, or is not repaired in a timely manner, and the ambient temperature increases significantly.
- Correction:
- Agility will notify owners, and agility field personnel will replace the valve seat and stem assembly, free of charge. the recall begin in july 2014. owners may contact agility's customer service at 1-949-236-5520.
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
9999 AGILITY FUEL SYSTEMS CNG FUEL TANK TSBs (8)
- Bulletin:
- ENP-047-3
- Component:
- 090000 fuel system, other
- Summary:
- Agility fuel systems: information regarding additional specific requirements of inspection and maintenance procedures for continued reliability in the field, and treated as an addendum, for bracket torque, isolator displacement, tank spin/
- Bulletin:
- SB-112013
- Component:
- 356000 equipment adaptive
- Summary:
- Agility: instructions provided regarding field replacement, field inspection, for eight lower member frame brackets on dart 40 ft. and dart 31 ft. frame assembly, as required to avoid abrading cng tanks if brackets fail while in service.
- Bulletin:
- WI-078
- Component:
- 350000 equipment
- Summary:
- Agility: procedure information regarding the modification and inspection of door latches and tank damage due to contact of threaded stud portion of center door latches. model dart 40' and 31'. *pe
- Bulletin:
- FSB-ENP-434
- Component:
- 356000 equipment adaptive
- Summary:
- Agility: to identify an installation using system serial number helps with specific system information and component part for a vehicle chassis and information plate is located on or near fuel management module or at cylinder valve end of
- Bulletin:
- ENP-616
- Component:
- 070000 fuel system, gasoline
- Summary:
- Temporary cng fuel supply "pony tanks" made prior to 2017 exceeds certain fuel inlet pressure requirements for certain natural gas engines. the 24409010 pony tank retrofit includes a new pressure regulator and a high pressure filter to impr
- Bulletin:
- ENP-651
- Component:
- 160000 structure
- Summary:
- This field service bulletin provides the procedure to remove and replace side mount system "j-brackets." the brackets are improved to help reduce rubber isolator wear.
- Bulletin:
- ENP-651
- Component:
- 070000 fuel system, gasoline
- Summary:
- Type 3 and type 4 cng fuel cylinders used in natural gas fuel systems expand and contract in normal operation. mounting systems must compensate for these changes. the isolators are a maintenance item and periodic replacement is needed. an i
- Bulletin:
- ENP-604
- Component:
- 070000 fuel system, gasoline
- Summary:
- This service bulletin includes esa valve information provided by omb saleri spa and is reproduced with permission. the two procedures in this bulletin are: (1) removing and replacing an omb esa cylinder valve coil and (2) installing a press
Home | Privacy