2017 HINO NV8J TSBs (25)

Bulletin:
167-T1702-05
Component:
063000 engine and engine cooling:exhaust system
Summary:
Tt-17-009 beginning with 2017 model year, all hino vehicles are equipped with a particulate matter (pm) sensor near the exhaust exit. a ceramic sensing element is used in the pm sensor and can be damaged or broken if the sensor is dropped o
Bulletin:
167-B0501-12
Component:
060000 engine (pws)
Summary:
05 - 011 corrections to workshop manuals for j08 engines. the standard gap between ends of the second piston ring and the oil ring.
Bulletin:
167-B0502-12
Component:
110000 electrical system
Summary:
Sb - 05 - 004 speedometer recalibration. this document is to inform of the procedure to calibrate the pulse adjust module whenneeded (ex. tire size change, rear carrier ratio change).
Bulletin:
167-B0503-12
Component:
060000 engine (pws)
Summary:
Sb ? 05 - 010 correction to workshop manuals for the j08e engine. a) resistance between terminals of the air intake pre-heater relay should be 64.0 ? 96.0 ohms b) illustration of the air intake pre-heater terminal should be revised. c) r
Bulletin:
167-B0504-12
Component:
063000 engine and engine cooling:exhaust system
Summary:
Sb - 05 - 003 this document is to inform dealers and workshops on procedures to activate exhaust brake operation.
Bulletin:
167-B0505-12
Component:
356000 equipment adaptive
Summary:
Sb ? 05 - 007 design change of water pipe for j08e
Bulletin:
167-B0506-12
Component:
060000 engine (pws)
Summary:
Sb ? 05 - 008 this document is to inform the dealers about the addition of the pressure sensor cover and related part for the j08e engine.
Bulletin:
167-B0508-12
Component:
106000 power train:axle assembly
Summary:
Sb - 05 - 005 proper maintenance procedures for grease lubricated front axles
Bulletin:
167-B0601-12
Component:
060000 engine and engine cooling
Summary:
Sb ? 06 - 001 design change of engine oil cooler housing. the casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. these grooves aid in the retentio
Bulletin:
167-B0602-12
Component:
061320 engine and engine cooling:engine:other fuel types:turbo-charger
Summary:
Sb ? 06 - 002 fuel filter usage. this bulletin provides technical information for proper fuel filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel fil
Bulletin:
167-B0803-12
Component:
203000 wheels:lugs/nuts/bolts
Summary:
Sb - 08 - 005 this document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
Bulletin:
167-B1503-12
Component:
355200 equipment:other:owners/service/other manual
Summary:
Sb-15-002 correction of workshop manual for 2013 - 2015my (revision of troubleshooting procedure for the dtc p2123)
Bulletin:
167-B1504-12
Component:
355200 equipment:other:owners/service/other manual
Summary:
Sb-15-003 correction of workshop manual for hino 2015my (revision of troubleshooting procedure for the dtc p0421)
Bulletin:
167-B1602-12
Component:
118000 electrical system: software
Summary:
Sb-16-015 enhanced dcu (dosing control unit) software has been released.illumination of the check engine light. the dcu may falsely detect an issue and record any of the 3 following dtc?s in the dcu. p142a(def pump temperature sensor - out
Bulletin:
167-B1605-12
Component:
118000 electrical system: software
Summary:
Sb-16-012 in the event that a subject vehicle exhibits a (mil) malfunction indicator lamp and a p0300 (all injector misfire) is stored in the engine ecu, enhanced ecu software is available to correct this concern.
Bulletin:
167-B1618-12
Component:
355200 equipment:other:owners/service/other manual
Summary:
Addition of detailed explanation of the fuel pipe installation.
Bulletin:
167-B1621-12
Component:
355200 equipment:other:owners/service/other manual
Summary:
Sb-16-010 correction of the inspection of the dpr filter.
Bulletin:
167-B1623-12
Component:
060000 engine (pws)
Summary:
sb-16-019 an enhanced fuel cut valve is available to address a potential sticking condition that results in excess residual pressure in the dosing injector (7thinjector) supply pipe. a sticking fuel cut valve may result in the following dt
Bulletin:
167-B1307-12
Component:
103300 power train:automatic transmission:gear position indication (prndl)
Summary:
13-008 design change of the idler gear case and idler gear bolt. abnormal load such as a stuck supply pump was applied to gear train then causing the bolt to loosen. therefore, an enhancement to the case and bolt were carried out. the idle
Bulletin:
167-B1312-12
Component:
355200 equipment:other:owners/service/other manual
Summary:
Sb-13-009 this bulletin is to inform dealers and workshops of proper paint codes for all hino models. all models
Bulletin:
167-T0706-12
Component:
355200 equipment:other:owners/service/other manual
Summary:
07 - 006 voltage drop test
Bulletin:
167-T1514-12
Component:
162000 structure:body
Summary:
Tt-15-016 the purpose of this publication is to communicate the standard measuring positions on the hino chassis. in some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
Bulletin:
167-R1701-11
Component:
118000 electrical system: software
Summary:
The engine ecu (engine control unit) on all 2016my-2018my trucks contained in dealer inventory need to be reprogrammed prior to delivery. subject vehicles contain an error in the def monitoring program. to eliminate this situation, it is
Bulletin:
167-R1702-11
Component:
118000 electrical system: software
Summary:
The engine ecu (engine control unit) on all 2016my-2018my trucks contained in dealer inventory need to be reprogrammed prior to delivery. subject vehicles contain an error in the def monitoring program. to eliminate this situation, it is
Bulletin:
167-B1702-11
Component:
355200 equipment:other:owners/service/other manual
Summary:
All 16my-18my units that have been sold and are in service today will be addressed with a future campaign once the proper agencies have been notified and approval is received.

Home | Privacy