2016 HONDA VT750 Recall
- Campaign:
- 15V874000 on 12/22/2015
- Component:
- Electrical system:wiring
- Affected:
- 22,142
- Defect:
- Honda (american honda motor co.) is recalling certain model year 2012-2014 vt750ca, vt750c2 and vt750c2f, 2011-2016 vt750c, 2013-2016 vt750cs, 2010-2016 vt750c2b and 2013-2014 vt750c2s motorcycles. engine vibration may cause the bank angle sensor wire to rub on the wire harness joint connector, resulting in a loss of the sensor signal.
- Consequence:
- Without the bank angle sensor signal, the engine may stall while riding, increasing the risk of a crash.
- Correction:
- Honda will notify owners, and dealers will relocate the joint connector and replace the bank angle sensor, free of charge. the recall began on january 25, 2016. owners may contact honda motorcycle customer service at 1-866-784-1870. honda's number for this recall is jw7.
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
2016 HONDA VT750 TSBs (4)
- Bulletin:
- DEN-K3Q5J-06
- Component:
- 140000 air bags
- Summary:
- This communication is informing honda of a delamination issues within an i.c. produced by nxp and assembled into airbag sensor supplied by denso international america, inc. this delamination issue manifests itself as an open circuit within
- Bulletin:
- 2010-2016 VT750
- Component:
- 060000 engine (pws)
- Summary:
- "service bulletin - honda has determined that continuous engine vibration may cause the bank angle sensor wires to break, resulting an open circuit in the bank angle sensor. if an open in the bank angle sensor electrical circuit develops,
- Bulletin:
- MCMNF01082016301
- Component:
- 350000 equipment
- Summary:
- "dealer message - the service bulletin in support of the safety recall of 2010-2016 vt750 series motorcycles for a defective bank angle sensor is posted on in."
- Bulletin:
- A15060D
- Component:
- 010000 steering
- Summary:
- Service news article - to prevent damage during shipping, leather-wrapped steering wheels come with a protective plastic covering. the easiest way to remove it during pdi is to grab the covering with both hands near the top of the steering
Home | Privacy