2015 ELDORADO AMERIVAN Recall
- Campaign:
- 15V556000 on 09/02/2015
- Component:
- Seat belts:front:anchorage
- Manufactured:
- 06/30/2015 - 08/19/2015
- Affected:
- 23
- Defect:
- Eldorado national-kansas (eldorado) is recalling certain model year 2015 amerivan vehicles built on toyota sienna chassis manufactured july 1, 2015, to august 20, 2015. in the affected vehicles, the toyota seat belt tab may not properly latch to the amerivan's qstem seat belt buckle assembly. as a result, the seat belt may unlatch unexpectedly when pulled on. as such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 210, "seat belt assembly anchorage."
- Consequence:
- If the seat belt unlatches, the occupant would not be properly restrained and is at an increased risk of injury in the event of a crash.
- Correction:
- Eldorado will notify owners, and dealers will install a new q-stem assembly with an alternate buckle assembly, free of charge. the recall began on october 7, 2015. owners may contact eldorado customer service at 1-785-827-1033.
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
2015 ELDORADO AMERIVAN TSBs (15)
- Bulletin:
- 1-2014-0611_V1
- Component:
- 115000 electrical system:fuses and circuit breakers
- Summary:
- This communication notifies the dealer/customer that the iod fuse has been removed to limit the amount of parasitic draw on the battery. this communication instructs the dealer/customer to reconnect the iod fuse in the tipm before operatin
- Bulletin:
- 1-2014-1218-TY_V
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- This instruction outlines the procedure to adjust the ramp stow position.
- Bulletin:
- 1-2014-1218_V1
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- This instruction outlines the procedure to adjust the ramp stow position.
- Bulletin:
- 1-2015-0126-TY_V
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- This tsb outlines the procedure to modify the motor/ramp assembly installation due to a motor change.
- Bulletin:
- 1-2015-0401_V1
- Component:
- 162300 structure:body:door
- Summary:
- This tsb outlines the procedure for the lower door harness modification to the amerivan products with power or manual sliding doors.
- Bulletin:
- 1-2015-0528_VI
- Component:
- 356000 equipment adaptive
- Summary:
- This instruction outlines the procedure to adjust the manual ramp.
- Bulletin:
- 1-2015-0716_V1
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- This tsb outlines the procedure to repair the ramp plate.
- Bulletin:
- 2016-0009V3
- Component:
- 161000 structure:frame and members
- Summary:
- This communication provides instruction to correct a running/dripping undercoating condition that has been discovered on certain 2015 and 2016 chrysler and toyota amerivan vehicles. this has been noticed in areas where higher termperatures
- Bulletin:
- 1-2011-0930_V1
- Component:
- 162310 structure:body:door:hinge and attachments
- Summary:
- This tsb outlines the procedure to modify the lower door arm cable mount bracket to allow increased door travel, providing a larger opening for mobility aid access.
- Bulletin:
- 1-2013-0109_V1
- Component:
- 162300 structure:body:door
- Summary:
- This instuction outlines the procedure to adjust the door open switch.
- Bulletin:
- 1-2013-0507-TY_V
- Component:
- 114000 electrical system:wiring
- Summary:
- This tsb outlines the procedure necessary to complete the step light wiring when installating the step light to the vehicle exterior step assembly.
- Bulletin:
- 1-2013-0606_V1
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- This instruction outlines the procedure to adjust the ramp assembly on the 14-inch drop floor .
- Bulletin:
- 1-2013-0708-TY_V
- Component:
- 220000 seats
- Summary:
- This instruction outlines the procedure to remove the passenger side seat and ramp assemblies for repair/replacement of the ramp assembly.
- Bulletin:
- 1-2015-1124-_V1
- Component:
- 162300 structure:body:door
- Summary:
- This instruction outlines the procedure for the door track removal, modification, and re-assembly/installation to increase the door opening/travel.
- Bulletin:
- 2016-0006
- Component:
- 118000 electrical system: software
- Summary:
- This communication outlines the procedure to reconfigure pin locations in the harness black plug to allow the power door add program 4.00 to operate correctly.
Home | Privacy