2014 DUCATI 1199 PANIGALE Recall
- Campaign:
- 15V268000 on 05/07/2015
- Component:
- Suspension:rear:shock absorber
- Manufactured:
- 12/31/2013 - 03/22/2015
- Affected:
- 549
- Defect:
- Ducati north america (ducati) is recalling certain model year 2014 1199 panigale s version, 1199 superleggera and 1199 panigale r version motorcycles. the affected motorcycles may have been built with an improperly manufactured rear shock absorber. the nut on the damper rod for these shock absorbers may loosen, resulting in a loss of damping and the possible disassembling of the shock.
- Consequence:
- If the damper rod nut loosens, shock absorber performance would be affected, possibly causing a loss of vehicle control and increasing the risk of a crash.
- Correction:
- Ducati will notify owners, and dealers will either replace the rear shock assembly or send the shock to the supplier's repair center to be remedied, free of charge. the recall began on june 29, 2015. owners may contact ducati customer service at 1-800-231-6696. ducati's number for this recall is rcl-15-002.
- Notes:
- Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
2014 DUCATI 1199 PANIGALE TSBs (12)
- Bulletin:
- SVC-11-018
- Component:
- 350000 equipment
- Summary:
- See instructions. latest tool for models 2014 have been released. 06/19/14*lj
- Bulletin:
- SVC-14-016
- Component:
- 110000 high voltage battery
- Summary:
- See instructions. 06/19/2014*lj
- Bulletin:
- SVC-14-012
- Component:
- 356000 equipment adaptive
- Summary:
- Ducati: a new comprehensive list for recent ducati service specific equipment along with the latest tools of model year 2014 has been released. *pe
- Bulletin:
- SB-SVC-14-025
- Component:
- 062300 engine and engine cooling:cooling system:hose
- Summary:
- Ducati: a slight seepage of coolant is coming from hose clamp connections and need not be changed. clamps on rubber hoses need to be checked. *pe
- Bulletin:
- 15-001
- Component:
- 101000 power train:clutch assembly
- Summary:
- Ducati my 2013-2014: customer complaints of loud noise when using clutch slave piston control. it is possible for water to seep into the clutch pushrod. *lj
- Bulletin:
- TSB-15-001
- Component:
- 101000 power train:clutch assembly
- Summary:
- Ducati: customer complaint of clutch slave noise heard when using the control, dmh quality and engineering department research determined that it is possible for water to seep into the clutch rod. *lj
- Bulletin:
- SRV-SRB-16-017
- Component:
- 350000 equipment
- Summary:
- Transparent maintenanceposter and scheduled maintenance checklist update - this service bulletin contains ducati service minimum requirements. it includes maintenance checklists and intervals, as well as illustrations for display.
- Bulletin:
- SRV--ESB-16-002
- Component:
- 060000 engine (pws)
- Summary:
- Immobilizer systems - this electronic service bulletin informs ducati technicians regarding ducati immobilizer systems (engine start lock systems) for all ducati models from model year 2006 to model year 2016. this bulletin also contains a
- Bulletin:
- TSB-13-002
- Component:
- 114000 electrical system:wiring
- Summary:
- Instrument panel supplemental wiring - this technical service bulletin provides wiring harness information pertaining to partial failure of the left side handlebar switch. associated part numbers, installation procedures, illustrations an
- Bulletin:
- SRV-TTB-13-71
- Component:
- 100000 power train
- Summary:
- 1199 panigale r_adjusting swingarm shaft height_ing - this tips and tricks technical bulletin provides correct height adjustment for the supplemental to previous training course provided by ducati. associated instructions, illustrations, a
- Bulletin:
- SRV-ESB-18-004
- Component:
- 060000 engine (pws)
- Summary:
- Immobilizer systems - this electronic service bulletin supersedes srv-esb-16-002 published 10/06/2016. it contains updated system information regarding ducati immobilizer systems (engine start lock systems) for the listed year models. the
- Bulletin:
- SRV-SRB-18-022
- Component:
- 060000 engine and engine cooling
- Summary:
- Installation procedure of water pump breather tube - this service bulletin informs dealers and service managers of the availability of a water pump breather tube kit part no.81420081a. this breather tube kit allows potential coolant seepage
Home | Privacy