2013 PREVOST H3-VIP Recalls (2)

Campaign:
16V133000 on 03/03/2016
Component:
Engine and engine cooling:cooling system:hose
Manufactured:
06/28/2011 - 09/21/2015
Affected:
1,348
Defect:
Prevost cars, inc. (prevost) is recalling certain model year 2012-2016 h3-41 and h3-45, 2011-2016 h3-vip, 2011-2016 x3-45 coach vehicles, 2012-2016 x3-vip vehicles, and 2011-2013 xl2 entertainer vehicles. the coolant line on the affected vehicles may be missing a positioning clip, allowing the coolant line to rub against the braided fuel hose at one of the injectors.
Consequence:
Contact between the fuel line and the coolant line may cause a fuel leak and result in fuel spraying onto hot exhaust components increasing the risk of an engine compartment fire.
Correction:
Prevost will notify owners, and dealers will inspect the fuel line for abrasion, replacing it as necessary. the fuel and coolant lines will be properly secured. these repairs will be performed free of charge. the recall began on april 20, 2016. owners may contact prevost customer service at 1-418-883-3391. prevost's number for this recall is sr16-18.
Notes:
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
Campaign:
16V133000 on 03/03/2016
Component:
Fuel system, diesel
Manufactured:
06/28/2011 - 09/21/2015
Affected:
1,348
Defect:
Prevost cars, inc. (prevost) is recalling certain model year 2012-2016 h3-41 and h3-45, 2011-2016 h3-vip, 2011-2016 x3-45 coach vehicles, 2012-2016 x3-vip vehicles, and 2011-2013 xl2 entertainer vehicles. the coolant line on the affected vehicles may be missing a positioning clip, allowing the coolant line to rub against the braided fuel hose at one of the injectors.
Consequence:
Contact between the fuel line and the coolant line may cause a fuel leak and result in fuel spraying onto hot exhaust components increasing the risk of an engine compartment fire.
Correction:
Prevost will notify owners, and dealers will inspect the fuel line for abrasion, replacing it as necessary. the fuel and coolant lines will be properly secured. these repairs will be performed free of charge. the recall began on april 20, 2016. owners may contact prevost customer service at 1-418-883-3391. prevost's number for this recall is sr16-18.
Notes:
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.

2013 PREVOST H3-VIP TSBs (57)

Bulletin:
WB15-19G
Component:
060000 engine and engine cooling
Summary:
On the vehicles affected by this bulletin, vibration is causing damage to a/c compressor and compressor harness connectors. addition of a reinforcement bracket to bitzer a/c compressor is needed to increase the installation stiffness and re
Bulletin:
IS-15003C
Component:
110000 electrical system
Summary:
This instruction sheet explains how to use the bosch hd10 24v-150a alternator conversion kit
Bulletin:
MI16-17E
Component:
112000 electrical system:alternator/generator/regulator
Summary:
This maintenance information explains how to remove and install the bosch hd10 (120a or 150a) alternator.
Bulletin:
WB13-49
Component:
063000 engine and engine cooling:exhaust system
Summary:
On the vehicles affected by this bulletin, replace the prototype version of the urea quality sensor #21891229 by the production version of the sensor #22073036.
Bulletin:
WB13-55A
Component:
063000 engine and engine cooling:exhaust system
Summary:
On the vehicles affected by this bulletin, the upper support of the tripod fan support must be inspected for the presence of weld. if no weld is found, it must be replaced.
Bulletin:
WB13-48A
Component:
060000 engine and engine cooling
Summary:
On the vehicles affected by this bulletin a weld may be missing on a coolant piping support located on the retarder oil cooler support. in a first step, inspect the support for the presence of the weld. if there is no weld, perform the repl
Bulletin:
WB13-56
Component:
350000 equipment
Summary:
On the vehicles affected by this bulletin, the air dryer assembly may present a leak at the pressure probe connection. the o-ring in this location may be deformed due to the fitting arrangement. adding a metal ring will prevent this issue.
Bulletin:
WB13-63A
Component:
110000 electrical system
Summary:
On the vehicles affected by this bulletin, inspection and replacement of 70 amp circuit breakers in the rear electrical compartments is required.
Bulletin:
SP13-75
Component:
071110 fuel system, gasoline:storage:tank assembly:filler pipe and cap
Summary:
Vehicles affected by this bulletin need to have their fuel filler cap lanyard replaced for better access.
Bulletin:
WB13-65D
Component:
063000 engine and engine cooling:exhaust system
Summary:
On the vehicles affected by this bulletin, software updates with enhancements are available for the multiplex system, for the ems and aftertreatment control module (acm). on all vehicles, perform a dpf service regeneration and crystal subli
Bulletin:
WB14-42A
Component:
010000 steering
Summary:
On the vehicles affected by this bulletin, perform a power source improvement and a multiplex software update for the steering gateway module. on a limited number of vehicles, the module will be replaced with the latest version of the part.
Bulletin:
IS-13158
Component:
353000 equipment:electrical
Summary:
This instruction sheet explains how to install keyless keypad using either kit 069140 or 069141
Bulletin:
WB14-45C
Component:
110000 electrical system
Summary:
On the vehicles affected by this bulletin remove the acm relay and base identified r49. reconnect the 24v power wire and protect the remaining signal wires with shrink tube.
Bulletin:
IS-14130
Component:
353600 equipment:air conditioner
Summary:
This instruction sheet explains how to use retrofit kit for obsoleted small ac condensers (950018 & 950335)
Bulletin:
IS-15003D
Component:
060000 engine (pws)
Summary:
This insruction sheet explains how to insall the bosch hd10 24v-150a alternator conversion kit ? twin bosch mounted on volvo d13 engine
Bulletin:
WB15-19E
Component:
060000 engine and engine cooling
Summary:
On the vehicles affected by this bulletin, vibration is causing damage to a/c compressor and compressor harness connectors. addition of a reinforcement bracket to bitzer a/c compressor is needed to increase the installation stiffness and re
Bulletin:
MI16-05
Component:
355200 equipment:other:owners/service/other manual
Summary:
This maintenance information shares information about the bendix m-32qr valve replaced by m-40qr model htat need to be taken into consideration, specially when switching them for the first time on a vehicle.
Bulletin:
MI16-16
Component:
110000 electrical system
Summary:
This procedure explains how to perform a starter removal and installation, and does apply to melco 105p70 starter part number #21212425.
Bulletin:
IS-14085
Component:
350000 equipment
Summary:
This instruction sheet explains how to prevent ac copper pipes chaffing at engine bulkhead
Bulletin:
MI16-15A
Component:
199000 tires:pressure monitoring and regulating systems
Summary:
The beru sensors used on prevost vehicles to monitor tire pressure (tpms system) are being replaced by new huf sensors and their corresponding stainless valves stems. since the older and newer sensors are using different valve stems, repla
Bulletin:
MI16-23
Component:
355200 equipment:other:owners/service/other manual
Summary:
This maintenance information explains that decals are available to update the front junction box on 2013 to 2016 prevost vehicles; the decals will provide updated information and component descriptions. refer to the identification part of t
Bulletin:
Wb16-29
Component:
118000 electrical system: software
Summary:
On the vehicles affected by this bulletin, update ems and acm software to the latest version available. this update must be carried out by qualified technicians. as soon as possible, make an appointment with your nearest prevost service cen
Bulletin:
MI16-15B
Component:
351300 equipment:recreational vehicle:lpg tank valve/gauge
Summary:
The beru sensors used on prevost vehicles to monitor tire pressure (tpms system) are being replaced by new huf sensors and their corresponding stainless valves stems. since the older and newer sensors are using different valve stems, repla
Bulletin:
SP14-05B
Component:
060000 engine (pws)
Summary:
On the vehicles affected by this bulletin, perform a turbo replacement if fault codes 27 fmi 7 or spn641 fmi 7 or p004607 (obd13) are found. bulletin affects d13h engines with serial number from 984581 up to 1026719, excluded.
Bulletin:
IS-15003B
Component:
110000 electrical system
Summary:
This instruction sheet explains how to use the bosch hd10 24v-150a alternator conversion kit
Bulletin:
CK17-27
Component:
356000 equipment adaptive
Summary:
This conversion kit explains how to to disable the acb radar.
Bulletin:
IS-15003D
Component:
110000 electrical system
Summary:
This instruction sheet explains how to use the bosch hd10 24v-150a alternator conversion kit
Bulletin:
Mi16-15
Component:
199000 tires:pressure monitoring and regulating systems
Summary:
The beru sensors used on prevost vehicles to monitor tire pressure (tpms system) are being replaced by new huf sensors and their corresponding stainless valves stems. since the older and newer sensors are using different valve stems, repla
Bulletin:
Wb15-19F
Component:
353600 equipment:air conditioner
Summary:
On the vehicles affected by this bulletin, vibration is causing damage to a/c compressor and compressor harness connectors. addition of a reinforcement bracket to bitzer a/c compressor is needed to increase the installation stiffness and re
Bulletin:
MI17-22
Component:
071100 fuel system, gasoline:storage:tank assembly
Summary:
This maintenance information explains how to inspect the fuel tank cradle mounting screws on a yearly basis
Bulletin:
IS-15003A
Component:
112000 electrical system:alternator/generator/regulator
Summary:
This instruction sheet explains how to use the bosch hd10 24v-150a altenrator conversion kit
Bulletin:
MI15-24
Component:
350000 equipment
Summary:
This maintenance information explains how to perform an inspection of the vehicle power cables. power cables in poor condition can be the cause of failures and serious damages in the engine compartment.
Bulletin:
MI15-18
Component:
160000 structure
Summary:
This maintenance information does explain how five year old vehicles and older should be subjected to a thorough structural inspection.
Bulletin:
IS11015B
Component:
353000 equipment:electrical
Summary:
This instruction sheet explains how to replace power relay p/n 561991 with improved power relay p/n 564218 and relay base p/n 564210
Bulletin:
WB12-31B
Component:
350000 equipment
Summary:
On the vehicles affected by this bulletin, a new and improved dipstick is available for installation.
Bulletin:
WB12-41A
Component:
060000 engine and engine cooling
Summary:
On the vehicles affected by this bulletin, an auxiliary coolant tank is available. this auxiliary coolant tank will prevent spillage due to expansion when main coolant surge tank is filled with too much coolant. *this warranty bulletin
Bulletin:
WB13-04A
Component:
353600 equipment:air conditioner
Summary:
On the vehicles affected by this bulletin, there may be an a/c low pressure message in the dashboard when the auxiliary fan is not running. adding a bypass piping and valve assembly will solve this issue.
Bulletin:
SP13-19A
Component:
063000 engine and engine cooling:exhaust system
Summary:
Grille frame gluing verification on the dpf door (left side, over the radiator door). if part shows no sign of separation or ungluing, it is ok. if testing reveals poor bonding, remove grille, glue and double face tape.
Bulletin:
SP13-14
Component:
110000 electrical system
Summary:
On the vehicles affected by this bulletin, inspection and replacement of 70 amp circuit breakers in the rear electrical compartments is required.
Bulletin:
WB13-32B
Component:
063100 engine and engine cooling:exhaust system:emission control
Summary:
On the vehicles affected by this bulletin, the nox sensor must be replaced and the ems software requires an update. this must be done to allow correct emissions inspection in particular states including california.
Bulletin:
SP13-34A
Component:
063000 engine and engine cooling:exhaust system
Summary:
On the vehicles affected by this bulletin, a relay needs to be added to allow the def to return to the tank after turning the key to the off position. in addition, the acm & mcm need to be reprogrammed to the latest version.
Bulletin:
MI13-06
Component:
061320 engine and engine cooling:engine:other fuel types:turbo-charger
Summary:
This maintenance information explains that hose clamps with a smaller diameter are available to increase the adjustment range at the upper and lower radiator flexible connections and at the oil cooler connections located under the turbocha
Bulletin:
WB13-29
Component:
062100 engine and engine cooling:cooling system:radiator assembly
Summary:
On the vehicles affected by this bulletin, a corrective measure is required due to bolts coming loose at the radiator fan clutch tripod attachment to the radiator. addition of four (4) locknuts (jam nuts) will prevent bolts to loosen.
Bulletin:
MI13-33
Component:
023100 suspension:multiple axle:torque arm
Summary:
This maintenance information explains that polyester reinforced silicone hoses and elbowscan be repalced by aramid reinforced hoses and elbows for improved long term durability, and that constant torque hose clamps for silicone hoses with 5
Bulletin:
MI1346
Component:
110000 electrical system
Summary:
This maintenance information explains that on some post epa 2010 vehicles, it is possible for the combined charging and starting system f81 fuse to blow unexpectedly. to avoid this situation, a 3 amp diode can be added to the corresponding
Bulletin:
SP13-52
Component:
060000 engine (pws)
Summary:
Risk of premature failure of top fan support due to absence of weld. in the engine compartment above radiator, inspect support to make sure support has two welds in the corners.
Bulletin:
SP14-25
Component:
060000 engine (pws)
Summary:
On the vehicles affected by this bulletin, tighten the ball studs on the engine bay door gas springs.
Bulletin:
WB14-06G
Component:
353600 equipment:air conditioner
Summary:
On the vehicles affected by this bulletin, perform the following verifications and modifications on the a/c system: bulletin is divided in five steps, refer to detailed instructions below. step 1: unloader replacement (step moved to war
Bulletin:
WB14-08C
Component:
011000 steering:wheel and handle bar
Summary:
On the vehicles affected by this bulletin, verify the revision numbers of the steering wheel gateway module and multiplex software. if applicable, replace with the latest version. a power source improvement is also required. on some vehi
Bulletin:
IS-18903
Component:
162310 structure:body:door:hinge and attachments
Summary:
Thisinstruction sheet explains how to set the right entrance door handle configuration for handle replacement.
Bulletin:
MI16-17F
Component:
111000 electrical system:battery
Summary:
This maintenance information explains how to remove and install the bosch hd10 (120a or 150a) alternators
Bulletin:
MI18-02
Component:
060000 engine and engine cooling
Summary:
This mainteannce informaiton presents the latest engine oil & filter change intervals for the volvo engine
Bulletin:
WB15-19H
Component:
353600 equipment:air conditioner
Summary:
This bulletin explains how to add a reinforcement bracket to bitzer a/c compressor to increase the installation stiffness and reduce vibration amplitude.
Bulletin:
IS-13009B
Component:
017000 steering:linkages
Summary:
This instruction sheet explains how to install and adjust drag link # 660699
Bulletin:
MI18-16A
Component:
112000 electrical system:alternator/generator/regulator
Summary:
This maintenance information presents guidelines to help with the diagnosis of the bosch hd10 alternators
Bulletin:
MI18-21
Component:
353600 equipment:air conditioner
Summary:
This maintenance information presents information about the bitzer a/c compressor oil change interval and reminds technicians to clean the oil filter/strainer and the magnetic drain plug.
Bulletin:
IS-18903
Component:
162310 structure:body:door:hinge and attachments
Summary:
This instruction sheet describes how to set the right entrance door handle configuration for handle replacement.

Home | Privacy