2011 HINO NA6J Recalls (2)
- Campaign:
- 12V555000 on 12/03/2012
- Component:
- Electrical system:battery:cables
- Manufactured:
- 08/17/2003 - 11/15/2011
- Affected:
- 35,142
- Defect:
- Hino is recalling certain model year 2005 through 2013 medium duty trucks, models na6j, nb6j, nc6j, nd8j, ne8j, nj8j, nf8j, and nv8j, manufactured from august 18, 2003, through november 16, 2011. over time, the main b+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the b+ circuit and its convoluted tubing sheath.
- Consequence:
- If the b+ circuit shorts to ground, it may lead to a fire.
- Correction:
- Hino will notify owners, and dealers will repair the vehicles free of charge. the recall began on january 17, 2013. owners may contact hino at 1-248-699-9390.
- Notes:
- Hino's recall campaign number is a8310.owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
- Campaign:
- 12V555000 on 12/03/2012
- Component:
- Electrical system:wiring
- Manufactured:
- 08/17/2003 - 11/15/2011
- Affected:
- 35,142
- Defect:
- Hino is recalling certain model year 2005 through 2013 medium duty trucks, models na6j, nb6j, nc6j, nd8j, ne8j, nj8j, nf8j, and nv8j, manufactured from august 18, 2003, through november 16, 2011. over time, the main b+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the b+ circuit and its convoluted tubing sheath.
- Consequence:
- If the b+ circuit shorts to ground, it may lead to a fire.
- Correction:
- Hino will notify owners, and dealers will repair the vehicles free of charge. the recall began on january 17, 2013. owners may contact hino at 1-248-699-9390.
- Notes:
- Hino's recall campaign number is a8310.owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
2011 HINO NA6J TSBs (28)
- Bulletin:
- 167-P1602-12
- Component:
- 060000 engine (pws)
- Summary:
- 13-008 injection pump drive case. please note the following part number changes to the injection pump bearing case. not replacing the correct replacement parts will result in major engine damage. the hino ordering system has been modified
- Bulletin:
- 167-B0502-12
- Component:
- 110000 electrical system
- Summary:
- Sb - 05 - 004 speedometer recalibration. this document is to inform of the procedure to calibrate the pulse adjust module whenneeded (ex. tire size change, rear carrier ratio change).
- Bulletin:
- 167-B0504-12
- Component:
- 063000 engine and engine cooling:exhaust system
- Summary:
- Sb - 05 - 003 this document is to inform dealers and workshops on procedures to activate exhaust brake operation.
- Bulletin:
- 167-B0508-12
- Component:
- 106000 power train:axle assembly
- Summary:
- Sb - 05 - 005 proper maintenance procedures for grease lubricated front axles
- Bulletin:
- 167-B0509-12
- Component:
- 103000 power train:automatic transmission
- Summary:
- Sb ? 05 - 006 upon removal of a transmission assembly from the vehicle, inspection is required to confirm the presence and correct installation of the two dowel pins in the rear engine housing. in some rare cases one or both dowel pins may
- Bulletin:
- 167-B0601-12
- Component:
- 060000 engine and engine cooling
- Summary:
- Sb ? 06 - 001 design change of engine oil cooler housing. the casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. these grooves aid in the retentio
- Bulletin:
- 167-B0602-12
- Component:
- 061320 engine and engine cooling:engine:other fuel types:turbo-charger
- Summary:
- Sb ? 06 - 002 fuel filter usage. this bulletin provides technical information for proper fuel filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel fil
- Bulletin:
- 167-B0702-12
- Component:
- 021600 suspension:front:wheel bearing
- Summary:
- Sb - 07 - 005 the document is to inform the dealers about the change in material and tightening torque of the rocker arm support bolts and camshaft bearing cap bolts.
- Bulletin:
- 167-B0803-12
- Component:
- 203000 wheels:lugs/nuts/bolts
- Summary:
- Sb - 08 - 005 this document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
- Bulletin:
- 167-T1202-12
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- 12-001 recording the burner event log (bel) on 11-13my trucks
- Bulletin:
- 167-T1303-12
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- 13-003 injection quantity test 11 thru 14my
- Bulletin:
- 167-B1423-12
- Component:
- 118000 electrical system: software
- Summary:
- Sb-14-005 2011my-2015my conventional keyless entry programming
- Bulletin:
- 167-B1423-12
- Component:
- 353000 equipment:electrical
- Summary:
- Sb-14-005 2011my-2015my conventional keyless entry programming
- Bulletin:
- 167-B1426-12
- Component:
- 162810 structure:body:hood:hinge and attachments
- Summary:
- Sa-14-026 the broken hood grille procedure (sb-14-020) has been revised to reuse the grille nuts (sz17906009) if possible. there is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. the revised p
- Bulletin:
- 167-B1415-12
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- Sb-14-003 the following is to inform you of the revision of the inspection procedure for the dtc?s p0340 and p0341. you are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to us
- Bulletin:
- 167-B1510-12
- Component:
- 063130 engine and engine cooling:exhaust system:emission control:gas recirculation valve (egr valve)
- Summary:
- Sb-15-010 some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the egr (exhaust gas recirculation) butterfly plate with a repeat p1604 dtc (diagnostic trouble code) stored in the engine ecu. a heated e
- Bulletin:
- 167-B1518-12
- Component:
- 162000 structure:body
- Summary:
- Sb-15-019 reinforcement brackets and fiberglass repair methods have been made available to address hood crack concerns. in the event a subject vehicle experiences cracking of the hood near the hinges, this repair procedure should be used
- Bulletin:
- 167-B1521-12
- Component:
- 020000 suspension
- Summary:
- Sb-15-022 in the rare event that a subject vehicle equipped with the 23k comfort ride air suspension experiences a premature main leaf failure, a 23k hd comfort ride air suspension may be installed with prior approval from hmm qa.
- Bulletin:
- 167-B1523-12
- Component:
- 060000 engine and engine cooling
- Summary:
- Sb-15-026 a subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. an improved head gasket has been made available as a servic
- Bulletin:
- 167-B1528-12
- Component:
- 353000 equipment:electrical
- Summary:
- Sb-15-031 foreign debris in the def (diesel exhaust fluid) tank may cause the scr (selective catalyst reduction) system to malfunction. this can result in dtc?s (diagnostic trouble codes) p20e8 or p20e9 - def pressure abnormality. an inlet
- Bulletin:
- 167-B1529-12
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- Sb-15-032 troubleshooting information and inspection procedure of the dtc/p2030 were revised.
- Bulletin:
- 167-B1621-12
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- Sb-16-010 correction of the inspection of the dpr filter.
- Bulletin:
- 167-B1101-12
- Component:
- 090000 fuel system, other
- Summary:
- Sb-11-002 requirements of biofuel usage for 2008my thru 2012my vehicles all applied models
- Bulletin:
- 167-B1307-12
- Component:
- 103300 power train:automatic transmission:gear position indication (prndl)
- Summary:
- 13-008 design change of the idler gear case and idler gear bolt. abnormal load such as a stuck supply pump was applied to gear train then causing the bolt to loosen. therefore, an enhancement to the case and bolt were carried out. the idle
- Bulletin:
- 167-B1308-12
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- 13-010 correction of workshop manuals. hint: in case the dtc p204f has being recorded in the engine ecu, but no dtc has been detected in the dcu, it is safe to think that power supply to the dcu was interrupted before the dtc was recorde
- Bulletin:
- 167-B1312-12
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- Sb-13-009 this bulletin is to inform dealers and workshops of proper paint codes for all hino models. all models
- Bulletin:
- 167-T0706-12
- Component:
- 355200 equipment:other:owners/service/other manual
- Summary:
- 07 - 006 voltage drop test
- Bulletin:
- 167-T1514-12
- Component:
- 162000 structure:body
- Summary:
- Tt-15-016 the purpose of this publication is to communicate the standard measuring positions on the hino chassis. in some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
Home | Privacy