2009 VAN HOOL A300K Recall

Campaign:
10V603000 on 12/05/2010
Component:
Visibility:rearview mirrors/devices:interior
Manufactured:
08/31/2005 - 03/30/2009
Affected:
1,673
Defect:
Van hool is recalling certain model year 2002 through 2011 transit buses and motorcoaches manufactured from august 2002 through october 2010, equipped with hadley remote mirror switches, part numbers 509vh and 509vh1f. the rear view mirror switch may overheat, causing the plastic housing to melt.
Consequence:
Excessive heating can cause a fire resulting in smoke, operator distraction, or personal injury. an overheated mirror switch could cause the exterior rear view mirrors to not operate. the mirrors may not adjust properly from the interior switch or operate poorly. therefore, the driver may not be able to have full use of the rear view mirror, increasing the risk of a crash.
Correction:
Van hool will notify owners via its dealer abc bus inc. owners will have the choice to perform the repair themselves or to take the vehicle(s) to an abc-location for repair, free of charge. the safety recall began on january 10, 2011. owners may contact the warranty administrator for abc bus, inc. toll free at 1-877-427-7278.
Notes:
Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

2009 VAN HOOL A300K TSBs (3)

Bulletin:
SB1241
Component:
135200 visibility:rearview mirrors/devices:exterior
Summary:
Van hool: the rear view mirror switch may overheat and cause a fire hazard and inoperative movement of mirrors. *rm
Bulletin:
SB1261A
Component:
010000 steering
Summary:
Vanhool: performance could be affected at very low temperatures due to grease in the bevel gear. additional manual force could be required to turn steering wheel if the grease becomes hard enough to affect drivability. *cn
Bulletin:
1261A
Component:
010000 steering
Summary:
Service information: bevel gear of front axle steering system service records have shown that the grease in the bevel gear could affect performance at very low temperatures (below -20°c/-4°f). if the grease in the bevel gear becomes hard e

Home | Privacy