2009 MERCEDES BENZ SLK Recall

Campaign:
08V303000 on 07/08/2008
Component:
Electrical system
Manufactured:
06/30/2004 - 03/30/2008
Affected:
404
Defect:
Mercedes-benz is recalling my 2006-2008 m-class, r-class, my 2005-2009 slk-class, my 2005-2008 c-class, my 2003-2004 and 2006-2008 clk-class, my 2003-2008 e-class, my 2004 and 2008 cl-class, my 2008 cls-class, my 2004 and 2007-2008 s-class, my 2003 g-class, and my 2003-2004, 2006 and 2009 sl-class vehicles. a software calibration number (scn) coding received on the affected vehicles during a recent workshop visit was incorrect. depending on the model year and model affected, the results of an incorrect scn coding can affect a number of vehicle safety and emission functions including the following types of functions: (1) the fuel gauge readings may be incorrect; (2) a stuck fuel-level sensor may not be displayed in the instrument cluster; (3) the obd system may cause the check engine light to illuminate incorrectly; and, (4) the speedometer may be out of tolerance.
Consequence:
In the event of a vehicle crash, the electrical fuel pump may not receive a crash signal that is required for the fuel pump to disconnect and prevent future fuel delivery as designed.
Correction:
Dealers will recode the scn free of charge. the recall began on august 30, 2008. owners may contact mercedes-benz at 1-800-367-6372.
Notes:
Mercedes-benz recall no. 2008 070001.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

2009 MERCEDES BENZ SLK TSBs (7)

Bulletin:
2008070005
Component:
022000 suspension:rear
Summary:
Mercedes benz: replace rear axle differential in models 219 and 230; model years 2009. the rear differential may have been filled with the incorrect gear oil. *pe
Bulletin:
TSB-42-10-109
Component:
034000 service brakes, hydraulic:foundation components
Summary:
Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an
Bulletin:
LI-47-30
Component:
061000 engine and engine cooling:engine
Summary:
Mercedes (xentry): engine diagnosis warning lamp activated. magnetic short between armature and pole core due to calibration error at valve and tolerance deviation by supplying manufacturer. this causes the purge valve to jam in the open
Bulletin:
C1A-091101
Component:
118000 electrical system: software
Summary:
Mercedes benz: reprogram mbrace (n123/4) dialed numbers to hughes. this action applies to new vehicle inventory only. *pe
Bulletin:
SB-32-25-82
Component:
021230 suspension:front:springs:air suspension system
Summary:
Mercedes-benz: shock absorber procedure. *rm
Bulletin:
LI-27-60-P049270
Component:
103000 power train:automatic transmission
Summary:
Mercedes-benz: the auto-transmission switches to limp home mode or has no power. there are multiple possible fault codes. a piston may be damaged. *rm
Bulletin:
LI-05-20-P
Component:
061000 engine and engine cooling:engine
Summary:
Mercedes-benz: the malfunction light is on with multiple possible trouble codes stored. there could be a problem with the camshaft and/or scoring of a piston. *rm

Home | Privacy