2008 MERCEDES BENZ E Recalls (2)
- Campaign:
- 08V006000 on 01/08/2008
- Component:
- Engine and engine cooling:engine:diesel
- Manufactured:
- 04/30/2006 - 10/30/2007
- Affected:
- 9,004
- Defect:
- On certain passenger vehicles equipped with diesel engines, the crankshaft sensor could fail due to separation of bond wires from the lead frame in the sensor. this results in an interruption in the electrical connection in the chip housing of the sensor.
- Consequence:
- When this happens, the vehicle may lose power rather than enter a limp-home mode. in addition, the vehicle cannot be restarted after failure of the electrical connection in the sensor, increasing the risk of a crash.
- Correction:
- Dealers will replace the crankshaft sensor. the recall began on february 4, 2008. owners may contact mercedes-benz at 1-800-367-6372.
- Notes:
- Mercedes recall no. 2008010005.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
- Campaign:
- 08V303000 on 07/08/2008
- Component:
- Electrical system
- Manufactured:
- 10/31/2002 - 10/30/2007
- Affected:
- 404
- Defect:
- Mercedes-benz is recalling my 2006-2008 m-class, r-class, my 2005-2009 slk-class, my 2005-2008 c-class, my 2003-2004 and 2006-2008 clk-class, my 2003-2008 e-class, my 2004 and 2008 cl-class, my 2008 cls-class, my 2004 and 2007-2008 s-class, my 2003 g-class, and my 2003-2004, 2006 and 2009 sl-class vehicles. a software calibration number (scn) coding received on the affected vehicles during a recent workshop visit was incorrect. depending on the model year and model affected, the results of an incorrect scn coding can affect a number of vehicle safety and emission functions including the following types of functions: (1) the fuel gauge readings may be incorrect; (2) a stuck fuel-level sensor may not be displayed in the instrument cluster; (3) the obd system may cause the check engine light to illuminate incorrectly; and, (4) the speedometer may be out of tolerance.
- Consequence:
- In the event of a vehicle crash, the electrical fuel pump may not receive a crash signal that is required for the fuel pump to disconnect and prevent future fuel delivery as designed.
- Correction:
- Dealers will recode the scn free of charge. the recall began on august 30, 2008. owners may contact mercedes-benz at 1-800-367-6372.
- Notes:
- Mercedes-benz recall no. 2008 070001.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
2008 MERCEDES BENZ E TSBs (5)
- Bulletin:
- C1A-071101
- Component:
- 010000 steering
- Summary:
- Replace steering angle sensor. erase any stored dtc codes as described in the procedure just prior to retail sale. *pe
- Bulletin:
- PB-35-31-05
- Component:
- 022520 suspension:rear:axle:non-powered axle assembly
- Summary:
- Mercedes benz: model 171.454, 456 (2005-2008) slk class; 204.054, 056, 081 (2008) c class; 211.022, 056, 072, 087, 090 (2006-2008) e class. vehicles produced between 2/21/08 and 4/3/08 with differential serial number 1824214 to 1865328.
- Bulletin:
- C1A-091101
- Component:
- 118000 electrical system: software
- Summary:
- Mercedes benz: reprogram mbrace (n123/4) dialed numbers to hughes. this action applies to new vehicle inventory only. *pe
- Bulletin:
- SB-32-25-82
- Component:
- 021230 suspension:front:springs:air suspension system
- Summary:
- Mercedes-benz: shock absorber procedure. *rm
- Bulletin:
- LI-05-20-P
- Component:
- 061000 engine and engine cooling:engine
- Summary:
- Mercedes-benz: the malfunction light is on with multiple possible trouble codes stored. there could be a problem with the camshaft and/or scoring of a piston. *rm
Home | Privacy