2004 GENIE TZ-50 Recalls (3)
- Campaign:
- 06V169000 on 05/17/2006
- Component:
- Steering:linkages
- Manufactured:
- 09/30/2004 - 03/24/2006
- Affected:
- 5,072
- Defect:
- On certain trucks, during assembly, the drag link attachment nuts at the pitman arm and steering arm may have been incorrectly torqued. residual grease and paint which was applied as a rust inhibitor on the steering arm may have contributed to a loss of torque after assembly.
- Consequence:
- Increased wear for the draglink connections can occur creating a noticeable increase in the amount of steering wheel free play. if this condition was ignored, a loss of steering control of the vehicle could occur which could result in a crash.
- Correction:
- Dealers will inspect the steering arm tightness and remove all grease and paint from the steering arms and retorque the draglink attachment nuts at the steering arm and pitman arm. the recall began on may 12, 2006. owners may contact hino at 1-248-648-6430.
- Notes:
- Hino recall no. m0050.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
- Campaign:
- 06V484000 on 12/26/2006
- Component:
- Electrical system
- Manufactured:
- 02/11/2004 - 05/18/2005
- Affected:
- 347
- Defect:
- On certain trailer mounted aerial work platform booms, the outriggers (stabilizers) can function when the machine is not in a fully stowed position.
- Consequence:
- The down limit switch and its location on the machine allow the limit switch to be activated when it comes in contact with the boom arm, making it possible to raise the outriggers while the platform is elevated, increasing the risk of injury to the operator.
- Correction:
- Genie will provide a limit switch replacement kit and installation instructions to owners of all affected machines. the recall began on january 11, 2007. owners may contact genie at 1-877-738-7530.
- Notes:
- Genie recall no. 060010.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
- Campaign:
- 07V141000 on 03/26/2007
- Component:
- Structure
- Manufactured:
- 02/11/2004 - 05/12/2004
- Affected:
- 81
- Defect:
- On certain trailer mounted aerial work platform booms, the hold down bracket that secures the mast/upper structure for transport may become damaged or loose over time. if the mast hold-down bracket sustains structural damage, it may no longer be capable of holding the trailer mast in place during transport.
- Consequence:
- This could result in upper structure movement and could contribute to the trailer becoming unstable when rounding a corner, increasing the risk of a crash.
- Correction:
- Genie will provide a mast cradle replacement kit to owners of all affected machines free of charge. the recall began on april 5, 2007. owners may contact genie at 866-927-7269.
- Notes:
- Genie recall no. 060013.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
Home | Privacy