2003 MAZDA MIATA Recall

Campaign:
03V206000 on 06/05/2003
Component:
Exterior lighting:fog lights
Manufactured:
07/09/2000 - 02/27/2003
Affected:
64,000
Defect:
On certain mini vans and passenger vehicles, the socket holder in the fog lights is installed in the lamp casing using pressure. during operation of the fog light, the heat from the bulb can expand the socket holder. the expansion can force the socket holder rearward. after repeatedly being subject to this expansion, if the fog light is also subjected to vibration during vehicle operation, the socket holder with the bulb holder and the wiring harness may separate from the fog light casing.
Consequence:
Should this occur, the bulb socket and the harness can drop inside the bumper and possibly but rarely, the heat generated by the bulb can cause the bumper to burn.
Correction:
Dealers will install a spring to prevent the socket holder from separating from the lamp case. owner notification began on july 14, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mazda at 1-800-222-5500.
Notes:
Mazda recall no. 1103f.customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

2003 MAZDA MIATA TSBs (37)

Bulletin:
0900403
Component:
138200 visibility:defroster/defogger system:rear window
Summary:
Rear window defroster grid line repair procedure. *tt
Bulletin:
0500103
Component:
102000 power train:manual transmission
Summary:
Clutch chatter during cold takeoff. on vehicles with manual transmissions built prior to 4/10/2003. *tt
Bulletin:
1003E
Component:
063100 engine and engine cooling:exhaust system:emission control
Summary:
Emission recall campaign 1003e - check engine light may erroneously illuminate and a diagnostic trouble code p2404 or p0456 may be stored indicating a problem in the emissions control system when no problem exists, or the check engine light
Bulletin:
0500103
Component:
102000 power train:manual transmission
Summary:
Clutch chatter during cold takeoff. on vehicles with manual transmissions built prior to 4/10/2003. *tt
Bulletin:
0501202
Component:
102000 power train:manual transmission
Summary:
6-speed manual transmission will not shift into 5th or reverse gears. *tt
Bulletin:
0900104
Component:
135100 visibility:rearview mirrors/devices:interior
Summary:
Port or dealer installed auto-dimming (electro-chromic) mirror, with electronic compass, ambient temperature. *mr
Bulletin:
0901304
Component:
162300 structure:body:door
Summary:
Rattling noise from driver's or passenger's door when driving on a rough road or closing the door. *tt
Bulletin:
0902604
Component:
353000 equipment:electrical
Summary:
Speedometer replacement procedure. *tt
Bulletin:
0102504
Component:
111000 electrical system:battery
Summary:
Battery test procedure requirements. *tt
Bulletin:
00204
Component:
063100 engine and engine cooling:exhaust system:emission control
Summary:
Evaporative emmissions and reciver adapters. *eh
Bulletin:
0800306
Component:
140000 air bags
Summary:
Non genuine accessories affect air bag operation. *kb
Bulletin:
00307
Component:
980000 unknown or other
Summary:
Availability of non-required tools. *kb
Bulletin:
SB-09-005-13
Component:
350000 equipment
Summary:
Mazda: on some vehicles, to avoid potential interference of foot placed on pedals, information is provided regarding proper use, and placement, of driver's floor mat. various models and model years. *pe
Bulletin:
00-004/12
Component:
060000 engine (pws)
Summary:
Summary to be provided on a future date.
Bulletin:
00-001-13-2748
Component:
355200 equipment:other:owners/service/other manual
Summary:
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin:
02-001-13-2752
Component:
350000 equipment
Summary:
Some customers may complain of signs of oil on the struts or shock absorbers. in most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. follow th
Bulletin:
09-005-13-2781
Component:
350000 equipment
Summary:
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any poten-tial interference with the foot pedals. the following are possible causes of floor mat interference, which can be avoided with
Bulletin:
00-001-13-2748A
Component:
355200 equipment:other:owners/service/other manual
Summary:
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin:
07-002-13-2842
Component:
353600 equipment:air conditioner
Summary:
A musty/mildew type odor may come from the vents when the air conditioning (a/c) system is operating. it is most noticeable when the a/c is first turned on. this odor is the result of mold growth in the a/c evaporator/cooling unit which is
Bulletin:
00-004-12-2741
Component:
355200 equipment:other:owners/service/other manual
Summary:
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin:
00-002-14-2936
Component:
350000 equipment
Summary:
Mazda north american operations received many requests from our dealers asking us to approve additional on-car brake lathes as an option for mnao authorized equipment. due to your feedback and after evaluating a few on-car brake lathes, we
Bulletin:
09-027-14-2935
Component:
356000 equipment adaptive
Summary:
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. the following are possible causes of floor mat interference, which can be avoided with p
Bulletin:
09-034-14-2956
Component:
356000 equipment adaptive
Summary:
In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.note:'mazda vehicles are manufactured with tamper-proof speedometers.'when a speedometer is replaced, the new speedometer will read zero
Bulletin:
01-003-15-3014
Component:
350000 equipment
Summary:
Use the following repair procedure to minimize the need to replace the catalyst converter/exhaust pipe when removing oxygen sensors and/or air fuel ratio sensors.
Bulletin:
09-001-16-3113
Component:
355200 equipment:other:owners/service/other manual
Summary:
If the immobilizer unit lc62-67-5g2* or dc69-67-5g2* needs to be replaced with a new one, these parts are no longer available. new alternative service parts kits are now available, including alternative immobilizer unit bj3d-67-5g2l or tc91
Bulletin:
SA-061-17
Component:
117000 digital instrument panel
Summary:
In an effort to achieve a higher level of customer experience and retain the value of mazda's vehicles, mnao warranty operations isĀ© 2017 mazda north american operations, u.s.a. allowing all mazda dealers to utilize a third party, specmo en
Bulletin:
09-035-17-3080
Component:
117000 digital instrument panel
Summary:
In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. it is the dealer?s responsibility to co
Bulletin:
00-001-18-3446
Component:
350000 equipment
Summary:
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin:
09-014-18-3443
Component:
160000 structure
Summary:
When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
Bulletin:
09-019-18-3450
Component:
356000 equipment adaptive
Summary:
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. the following are possible causes of floor mat interference, which can be avoided with p
Bulletin:
01-008-18-3451
Component:
111000 electrical system:battery
Summary:
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. for new vehicles in sto
Bulletin:
01-009-18-3452
Component:
111000 electrical system:battery
Summary:
The mazda gr8-1291 is required for all warranty battery testing. if the mazda gr8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. use the following test procedures in this service bulletin to test
Bulletin:
02-006-18-3449
Component:
021300 suspension:front:shock absorber
Summary:
Some customers may complain of signs of oil on the struts or shock absorbers. in most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. follow th
Bulletin:
07-002-18-3432
Component:
353600 equipment:air conditioner
Summary:
A musty/mildew type odor may come from the vents when the air conditioning (a/c) system is operating. it is most noticeable when the a/c is first turned on. this odor is the result of mold growth in the a/cevaporator/cooling unit which is c
Bulletin:
00-003-18-3480
Component:
030000 brakes (pws)
Summary:
Mazda north american operations has approved an additional on-car brake lathe as an option for mnaoauthorized equipment. the pro-cut on-car brake lathe has been added to the mnao authorizedequipment program.note: accu-turn is still an appro
Bulletin:
09-034-18-3430
Component:
180000 vehicle speed control
Summary:
In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. it is the dealer's responsibility to co
Bulletin:
01-016-18-3522
Component:
063000 engine and engine cooling:exhaust system
Summary:
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. the odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. sulfur smell is not a

Home | Privacy