2001 UTILITY TRAILER Recalls (2)

Campaign:
02V139003 on 05/28/2002
Component:
Service brakes, air:supply:check valve
Manufactured:
02/29/2000 - 05/30/2001
Affected:
2,620
Defect:
On certain trailers equipped with bendix sr-5 trailer spring brake valve assemblies, the molded rubber face of the inlet/exhaust valve (i/e valve) component of the affected valves can separate from the valve's metal insert. air can be trapped by a separated i/e valve causing it to balloon and block the exhaust passage of the trailer spring brake circuit.
Consequence:
This condition can result in the affected vehicles being unable to apply the trailer parking/emergency spring brakes during parking in the event of a trailer supply line failure. unintended rollaway could occur, possibly resulting in personal injury or death to the vehicle occupant or any bystanders.
Correction:
Bendix will notify customers and provide a repair kit and installation instructions free of charge. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bendix at 440-329-9000 or utility trailer at 1-800-423-6591.
Notes:
Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Campaign:
02V210001 on 09/11/2002
Component:
Service brakes, air:supply:check valve
Manufactured:
11/15/1995 - 01/27/2001
Affected:
206
Defect:
On certain trailers equipped with spring brake control valve assemblies, there is a recessed area on top of the valve in which a brass guide pin fits down inside the body of the valve and is held in place by a steel snap ring. the recessed area allows accumulation of water, dirt, and/or chemicals to build up behind the snap ring to the point where it will no longer contain the guide pin resulting in a failure of the air valve.
Consequence:
Failure of the valve in an empty or lightly loaded trailer while the vehicle is in motion could result in a hard application of the spring brakes, possibly locking up the trailer wheels and resulting in a vehicle crash.
Correction:
Sealco will provide a repair kit and installation instructions to its customers free of charge. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact sealco at 602-253-1007 or utility at 626-965-1541.
Notes:
Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

2001 UTILITY TRAILER TSBs (3)

Bulletin:
SB-01-003
Component:
355200 equipment:other:owners/service/other manual
Summary:
This bulletin was originally released on march 30, 2009. utility re-released on august 18, 2017 to reflect the addition of the utm plant in mexico.
Bulletin:
SB-10-005
Component:
160000 structure
Summary:
Utility released a bulletin outlining reefer and dry van rub rail parts required and installation instructions.
Bulletin:
SB-07-009
Component:
162200 structure:body:bumpers
Summary:
Utility re-issued the rear impact guard (bumber) requirements when requesting a replacement bumper and / or dot decal.

Home | Privacy