2000 UTILITY VS2R Recalls (2)

Campaign:
00V102003 on 05/29/2000
Component:
Suspension:front:hub
Manufactured:
07/31/1998 - 03/30/2000
Affected:
271
Defect:
Vehicle description: van-refrigerated/dry freight trailers equipped with conmet pregreased trailer hubs and a tire inflation system. the outboard bearing on the pregreased trailer axle hubs used with the tire inflation systems may fail due to the intrusion of contaminants through the tire inflation system.
Consequence:
An outboard bearing failure can result in a separation of the hub assembly from the spindle.
Correction:
Authorized dealers are instructed to convert greased hubs to oil hubs if the tire inflation system is to remain on the trailer. if the tire inflation system is removed, the hub must be inspected for contamination and corrosion. the hub and bearing assembly must be replaced if there is evidence of corrosion. if there is no evidence of corrosion, lubricant and seal manitenance can be performed and the hub reinstalled.
Notes:
Owner notification is expected to begin during june 2000.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact utility trailer at 1-626-854-7215 or consolidated metco at 1-800-425-4827.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Campaign:
03V361000 on 10/09/2003
Component:
Service brakes, air:antilock:abs warning light
Manufactured:
11/30/2000 - 08/30/2003
Affected:
307
Defect:
On certain trailers equipped with bendix ec-30t electronic control units (ecu). if the trailer-mounted abs warning lamp circuit experiences an electrical short and the short is not repaired, the high side power switch inside the ecu that controls the illumination of the trailer-mounted abs warning lamp may eventually become thermally stressed and experience an electrical short.
Consequence:
If the power switch shorts, it can result in an over-current condition in the ecu and lead to excessive heat, smoke, and possible fire.
Correction:
Bendix will provide a remedy kit and detailed instructions and also provide a labor allowance for the repair. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bendix at 1-800-478-1793 or utility at 626-965-1541.
Notes:
Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

2000 UTILITY VS2R TSBs (3)

Bulletin:
SB-01-003
Component:
355200 equipment:other:owners/service/other manual
Summary:
This bulletin was originally released on march 30, 2009. utility re-released on august 18, 2017 to reflect the addition of the utm plant in mexico.
Bulletin:
SB-10-005
Component:
160000 structure
Summary:
Utility released a bulletin outlining reefer and dry van rub rail parts required and installation instructions.
Bulletin:
SB-07-009
Component:
162200 structure:body:bumpers
Summary:
Utility re-issued the rear impact guard (bumber) requirements when requesting a replacement bumper and / or dot decal.

Home | Privacy