2000 INTERNATIONAL HARVESTER 9400I Recalls (4)

Campaign:
00V149000 on 05/29/2000
Component:
Equipment:recreational vehicle
Manufactured:
12/31/1997 - 03/23/2000
Affected:
649
Defect:
Vehicle description: heavy duty trucks built with international code 16sch (lower bunk webbing restraint). incorrect bolts were used to hold the bunk webbing restraint latch brackets to the bunk base.
Consequence:
In the event of a crash, the restraint may not contain the occupant and may result in property damage, personal injury, or death.
Correction:
Dealers will inspect and replace all grade 5 bolts with grade 8 bolts as required.
Notes:
Owner notification began may 30, 2000. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Campaign:
00V131005 on 06/15/2000
Component:
Power train:automatic transmission
Manufactured:
01/09/2000 - 04/19/2000
Affected:
223
Defect:
Vehicle description: heavy duty trucks equipped with eaton autoshift gen ii transmission assemblies. due to a software problem in the transmission assemblies, the transmission will select the wrong gear.
Consequence:
If an inappropriate gear is selected without the driver's knowledge, the vehicle will react differently than expected, possibly resulting in injury or crash.
Correction:
Dealers will replace the autoshift transmissions.
Notes:
Owner notificationbegan july 5, 2000. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825 or eaton at 1-888-880-0970. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Campaign:
01V023000 on 02/06/2001
Component:
Service brakes, air:slack adjusters
Manufactured:
10/06/1996 - 11/13/2000
Affected:
2,855
Defect:
Vehicle description: heavy duty trucks equipped with air brake haldex automatic slack adjusters, long stroke brake chambers, and dana brakes. the automatic slack adjuster anchor brackets can fail due to fatigue fracture and completely separate, causing the slack adjusters to function as manual slack adjusters.
Consequence:
If the support bracket for an automatic slack adjuster fails, the brakes at that wheel end will not automatically adjust. as the brake linings wear, the vehicle will have reduced braking capacity, increasing the risk of a crash.
Correction:
Dealers will install a new bracket on each suspect slack adjuster. owner notification began february 22, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
Notes:
Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Campaign:
04V100000 on 03/03/2004
Component:
Equipment:recreational vehicle
Manufactured:
03/31/1994 - 06/15/2002
Affected:
83,312
Defect:
On certain conventional trucks equipped with pro-sleeper berths, water intrusion can be found in the bunk control panel area and pool in the tops of the dome light, tv/vcr, and or refrigerator power switches.
Consequence:
The circuit boards in the switches could heat up , possibly produce a flame or fire, and cause property damage, personal injury, or death.
Correction:
Dealers will install a water shield over the back of the entire bunk control panel. owner notification began on july 16, 2004. owners should contact international at 1-800-448-7825.
Notes:
International recall no. 04503.customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

2000 INTERNATIONAL HARVESTER 9400I TSB

Bulletin:
IK-0900004
Component:
350000 equipment
Summary:
International: while installing horton fan hubs, wrong mounting bolts were used and should be replaced with new mounting bolts. *pe

Home | Privacy