1996 BMW Z3 Recalls (2)

Campaign:
97V131000 on 08/28/1997
Component:
Vehicle speed control
Manufactured:
06/30/1995 - 07/29/1997
Affected:
410,000
Defect:
The cruise control and throttle cables are attached to the same throttle valve actuating lever at the throttle housing. it is possible that the plastic bushing on either cable could break due to environmental influences coupled with vibration. if the bushing breaks, the outer cable housing can separate from the bushing. in this case, during application of the throttle pedal without cruise control being engaged, the outer tube could catch on the edge of the broken bushing.
Consequence:
This could cause the throttle valve to remain partially open. it his were to occur, the car might not decelerate as expected increasing the risk of a vehicle crash.
Correction:
Dealers will install a spring steel clip on the outer tube of each cable in the area of the adjusting screw and plastic bushing. the clip is designed to prevent the outer tube from dislodging from the bushing.
Notes:
Owner notification is expected to begin by the end of october 1997. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1-800-831-1117.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

Campaign:
06E026000 on 03/22/2006
Component:
Exterior lighting
Affected:
61,944
Defect:
Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Consequence:
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Correction:
Pro-a motors will notify owners and offer to repurchase the lamps. the recall began on april 3, 2006. owners may contact pro-a motors at 323-838-2988.
Notes:
This recall only pertains to pro-a motors aftermarket lamps and has no relation to any original equipment installed on the listed passenger vehicles.for more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

1996 BMW Z3 TSBs (12)

Bulletin:
12/15/96
Component:
061000 engine and engine cooling:engine
Summary:
M44 misfire faults 50, 51, 52 or 53. *tw
Bulletin:
61/18/96
Component:
121200 exterior lighting:headlights:switch
Summary:
Dimming function of headlight switch inoperative. *tw
Bulletin:
41/02/96
Component:
161000 structure:frame and members
Summary:
Creaks or rattles from a-pillar area. *tw
Bulletin:
72/07/96
Component:
355100 equipment:other:labels
Summary:
Child airbag letter, warning label and safety reference card. *tw
Bulletin:
52 01 97
Component:
220000 seats
Summary:
Seat backrest paddding wearing. *tw
Bulletin:
16 01 97
Component:
071100 fuel system, gasoline:storage:tank assembly
Summary:
Fuel tank flourination. *tw
Bulletin:
12 15 96
Component:
116200 electrical system:ignition:module
Summary:
M44 misfire faults 50, 51, 52 or 53. *tw
Bulletin:
16 01 98
Component:
070000 fuel system, gasoline
Summary:
Information on evaporative emission control and fuel filler cap / filler door labels. *yc
Bulletin:
121099
Component:
061000 engine and engine cooling:engine
Summary:
Information regarding voluntary emission recall campaign no. 99e-a01. *tt
Bulletin:
12 15 96
Component:
185000 vehicle speed control:cruise control
Summary:
Rough idle
Bulletin:
12 09 97
Component:
116200 electrical system:ignition:module
Summary:
The data set of the engine control module (dme) needs to be updated. *ak
Bulletin:
SI B12 12 10
Component:
060000 engine and engine cooling
Summary:
Bmw: when at lower speeds or stopping the engine idle dips too low because of a software problem. *rm

Home | Privacy