1993 MACK DM Recalls (3)

Campaign:
93V024000 on 03/24/1993
Component:
Trailer hitches
Affected:
4,924
Defect:
The carrier yoke bolts were manufactured with worn rolling thread dies, causing stress concentrations which caused cracks during the quenching process.
Consequence:
This condition can cause bolt failure and allow thedriveline to separate from the carrier assembly.
Correction:
Replace the carrier yoke bolts.
Notes:
System: trailer yoke.vehicle description: heavy trucks.

Campaign:
95E003010 on 09/26/1995
Component:
Service brakes, air:supply:hoses, lines/piping, and fittings
Manufactured:
09/30/1992 - 02/28/1995
Affected:
1,224
Defect:
Air system blockage in the air dryer occurs degrading the moisture removing capabilities of the dryer when the vehicle is operated in a cold environment and moisture accumulates and freezes in the air dryer or in the line between the dryer and the air system reservoir. the air dryer can become overpressurized causing the air dryer cartridge to separate from the mounting base.
Consequence:
If the air dryer separates from the base, the cartridge can separate sufficiently enough to cause personal injury or property damage.
Correction:
Dealers will equip air systems with a pressure relief valve to be located between the compressor and the air dryer. this pressure relief valve is intended to vent if excessive pressure develops in the air dryer.
Notes:
System: brakes; air dryer. vehicle description: heavy duty class 8 trucks equipped with rockwell wabco system saver "1000" or system saver "twin" air dryer. note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time, contact mack at 1-610-709-3011.also contact the national highwaytraffic safety administration's auto safety hotline at 1-800-424-9393.

Campaign:
95E017001 on 10/10/1995
Component:
Wheels
Manufactured:
03/31/1993 - 03/31/1993
Affected:
62
Defect:
These wheels are composed of 2 pieces - a disc and a rim which are normally welded together. these wheels lack the specified fillet welds.
Consequence:
If wheel separation occurs while the vehicle is inmotion, both steering and braking could be affected resulting in a vehiclecrash.
Correction:
Dealers will inspect the manufacturing codes stamped on each wheel and if a wheel falls within the specified date code range, the dealer will replace that wheel.
Notes:
System: wheels.vehicle description: heavy duty class 8 trucks equipped with 22.5 x 8.25,15" drop center, one-piece, tubeless dual wheels manufactured by accuride.note: if your vehicle is presented to an authorized dealer on an agreed uponservice date and the remedy is not provided free of charge within a reasonabletime, please contact mack at 1-610-709-3011 or accuride at 1-502-826-5000.also contact the national highway traffic safety administration's autosafety hotline at 1-800-424-9393.

Home | Privacy