1993 FORD F600 Recalls (3)

Campaign:
92V164000 on 11/26/1992
Component:
Wheels
Manufactured:
08/31/1992 - 08/31/1992
Affected:
192
Consequence:
Using the wrong sized clamps to attach the rim and tireassembly to the wheel spokes could cause the studs that attach the clamps to thespokes to bend. if the studs are bent, there is an increased risk of studfracture that could result in the rim and tire assembly breaking from thewheel.
Correction:
Replace the clamps and studs on the cast spoke wheels.
Notes:
System: wheels.vehicle description: incomplete 6000 to 12000 pound front gawr chassis-cabvehicles equipped with cast spoke wheels.decription of defect: one or more of the six clamps that hold the tire and rimassembly to the cast spokes of the front wheel may have been of an incorrectsize.note: the f150, f250, f350, f-super duty, and the bronco vehicles are notinvolved in this recall campaign.

Campaign:
95V095000 on 05/18/1995
Component:
Vehicle speed control
Manufactured:
06/30/1992 - 07/31/1993
Affected:
260
Defect:
Friction between the accelerat0r lever and the automatic transmission modulator lever can result in interference between the two levers which could prevent the engine from fully returning to idle.
Consequence:
This interference can prevent the engine from fully returning to idle and could result in loss of vehicle control and an accident.
Correction:
Dealers will install a revised modulator lever on the involved vehicles.
Notes:
System: fuel; throttle linkages and control and powertrain; transmission; automatic; lever and linkage. vehicle description: medium duty trucks and cowl-chassis vehicles equipped with 160 horsepower fd-1060 engine and automatic transmission.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time, please contact ford at 1-800-392-3673. also contact the national highwaytraffic safety administration's auto safety hotline at 1-800-424-9393.

Campaign:
97V124000 on 08/06/1997
Component:
Vehicle speed control:springs
Manufactured:
01/14/1992 - 05/01/1994
Affected:
2,500
Defect:
Vehicle description: heavy duty trucks, bus chassis-cowl, and basic chassis models equipped with cummins 5.9l 160 horsepower rotary injection pump diesel engines. the accelerator return springs can fracture.
Consequence:
The accelerator may not return to idle increasing the risk of a vehicle crash.
Correction:
Dealers will replace these springs with a torsion spring design.
Notes:
Owner notification is expected to begin september 30, 1997.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1-800-392-3673. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

1993 FORD F600 TSBs (7)

Bulletin:
95724
Component:
075000 fuel system, gasoline:carburetor system
Summary:
new service kit for retaining the diesel engine plastic air cleaner. *tw
Bulletin:
9582
Component:
061100 engine and engine cooling:engine:gasoline
Summary:
a revised service windshield wiper motor is now available. *tw
Bulletin:
951115
Component:
114000 electrical system:wiring
Summary:
stall or no start - fuel shutdown solenoid - wiring chafing on fuel injector lines-vehicles built before 10/19/94 with fd1060 engine and bosch p7100 fuel injection pump. *tw
Bulletin:
951515
Component:
013000 steering:gear box (other than rack and pinion)
Summary:
steering gear-replacement of bendix, steering gear with new ross steeering gear. *sd
Bulletin:
951713
Component:
112000 electrical system:alternator/generator/regulator
Summary:
generator-motorcraft 95amp-front bearing concern-fd1060/1460 engines- vehicles built before 7/3/95. *sd
Bulletin:
951714
Component:
061100 engine and engine cooling:engine:gasoline
Summary:
engine- 'knocking' noise - when operating engine at 200-2300 rpm - fd1460 engine
Bulletin:
01127
Component:
061100 engine and engine cooling:engine:gasoline
Summary:
Some vehicles equipped with 26 inch diameter fans may exhibit an engine overheat condition. *tt

Home | Privacy