1993 BMW 325 Recalls (3)

Campaign:
93V015000 on 02/04/1993
Component:
Visibility:defroster/defogger system:windshield:heater core
Manufactured:
12/31/1982 - 12/31/1992
Affected:
375,000
Defect:
The malfunction or failure of a coolant system component results in significantly increased coolant temperature and a resulting increase in system pressure.
Consequence:
Vehicles operated under this increased cooling systempressure condition can suffer damage or failure of parts of the cooling systemsuch as (1) leakage from a coolant hose, (2) leakage of the radiator orexpansion tank, (3) disconnection of a hose from a pipe or a fitting, and (4)cracks in the heater core end piece resulting in coolant leakage. in some cases,boiling coolant can contact the lower right leg of the driver resulting inburns. also, escaping coolant in the passenger compartment can cause vaporfogging of the interior surface of the windows, reducing driver visibility.
Correction:
Dealers will install a thermostatic bypass valve in the engine compartment to control coolant temperature in the heater core. also, a new design radiator cap will be installed, to control pressure and provide greater coolant overflow in the event of overheating.
Notes:
System: coolant system.vehicle description: passenger cars.
Campaign:
94V066000 on 04/12/1994
Component:
Fuel system, gasoline:delivery:hoses, lines/piping, and fittings
Manufactured:
05/31/1988 - 01/31/1993
Affected:
116,300
Defect:
Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. the clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.
Consequence:
Fuel seepage between the feed fuel hose and the engine fitting can result in free fuel in the engine compartment, which could result in a fire when exposed to a source of ignition.
Correction:
A redesigned feed fuel hose and hose clamp will be installed to alleviate the fuel seepage.
Notes:
System: fuel; fuel line fittings; metallic.vehicle description: passenger vehicles; models 318i, 318si, 318ic, 325i, 325is, 325ix, 325ic, 525i, 535i, 735i and 735il.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge, or the remedy does not correct the defect or noncompliance, please contact bmw at 1-800-831-1117. also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Campaign:
94V151000 on 08/17/1994
Component:
Seat belts:front:anchorage
Manufactured:
08/31/1992 - 07/31/1994
Affected:
57,000
Defect:
In a fmvss no. 208 30 miles-per-hour compliance test, an unbelted test driver dummy's chest maximum resultant acceleration was 70.8 g's, which exceeds the maximum allowable value of 60 g's. also, the unbelted passenger dummy's left femur maximum load was 2361 lbs, which exceeds maximum allowable value of 2250 lbs. the vehicles do not comply with fmvss no. 208, "occupant crash protection."
Consequence:
Consequence of non-compliance: in the event of an accident, the occupant will be subjected to an increased risk of injury.
Correction:
On automatic transmission models only, the dealer will replace the transmission support crossmember with a crossmember used on the manual transmission model. also, the transmission rear bushing supports will be replaced with bushing having different performance characteristics. the steering column front support bearing at the firewall will be replaced with a modified part using a teflon inner surface and teflon spray will be applied to the column housing in the area of the bearing. a brace will be added between the knee bolster support and the steering column.
Notes:
System: interior systems; passive restraints; air bag; driver; fmvss n0. 208.vehicle description: passenger cars, models 325i, 325ia, 325is, 325sa, and m3.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time or the remedy does not correct the noncompliance, please contact bmw service center at 1-800-831-1117. also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

1993 BMW 325 TSBs (3)

Bulletin:
120794(4116)
Component:
116200 electrical system:ignition:module
Summary:
engine will not start, primarily during cold weather or high altitude. *tw
Bulletin:
41/03/96
Component:
161000 structure:frame and members
Summary:
Wind noise diagnostics. *tw
Bulletin:
MSG1016
Component:
125000 exterior lighting:brake lights
Summary:
Recall 96v111 - this recall campaign involves the brake light switch. *tw

Home | Privacy