1992 GMC G15 Recalls (2)
- Campaign:
- 92V127000 on 09/28/1992
- Component:
- Service brakes, hydraulic:power assist
- Manufactured:
- 01/31/1992 - 01/31/1992
- Affected:
- 246
- Defect:
- The brake pedal assembly has a pushrod pin that is too small and it is installed in the wrong position, causing an increased brake pedal ratio and a decreased master cylinder stroke.
- Consequence:
- The reduced master cylinder stroke results in failure tomeet the partial system failure requirements of fmvss 105, "hydraulic brakesystems". a further reduction in braking ability at a time when partial systemfailure has occurred could result in a vehicle crash.
- Correction:
- Replace the brake assembly.
- Notes:
- System: brakes: brake pedal assembly; fmvss 105.vehicle description: vans equipped with vacuum power brakes.note: fmvss 105 requires that hydraulic brake systems have an emergency featurewhich stops the vehicle under specified conditions. all hydraulic brake systemsare designed with a split system. each split works independently from the other.the partial system failure test of the fmvss is performed with one of the splitsystems inoperative.
- Campaign:
- 06E043000 on 05/21/2006
- Component:
- Fuel system, gasoline
- Affected:
- 88,303
- Defect:
- Certain replacement fuel filters, fram brand name p/n g3727, with date codes x52911 through x60801 sequentially or x600141 and a mexico country or origin marking on the fuel filter housing manufactured from october 18, 2005, through march 21, 2006, sold for use on the vehicles listed above and on certain school buses. (to see the school bus engine sizes, click on "document search" and then "bus applications"). the connector on the fuel filter was not manufactured to honeywell's specification. as a result, the o-ring may not seat correctly on the fuel line.
- Consequence:
- This condition may cause an inadequate seal at the connection, potentially leading to a fuel leak. in the presence of an ignition source, a fire could occur.
- Correction:
- Honeywell will notify owners and replace the fuel filters free of charge. the recall began on october 18, 2006. owners may contact fram customer service at 1-800-890-2075 (option 1).
- Notes:
- This recall only pertains to aftermarket fram fuel filters and has no relation to any original equipment installed on the vehicles listed.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
Home | Privacy