1992 FREIGHTLINER MB-60 Recalls (3)
- Campaign:
- 92V057000 on 04/23/1992
- Component:
- Seat belts:front:anchorage
- Manufactured:
- 04/30/1991 - 06/30/1992
- Affected:
- 1,400
- Defect:
- A number of cabs were assembled with fewer welds than specified in the upper b pillar near the anchorage for the seat belt. welding materials used on the inboard anchorage bracket under the cab deck will not meet fmvss no. 210 load test requirements when three seating positions are provided.
- Consequence:
- Safety belt anchorage systems that do not comply to theload test requirements subject the seat occupant to greater risk of injury inthe event of a sudden stop or accident.
- Correction:
- Add reinforcement welds in the upper b pillar and add fasteners to the lower deck anchorage bracket.
- Notes:
- System: safety belt anchorages, fmvss no. 210.vehicle description: heavy trucks manufactured before february 2, 1992 andcabs with a center seating position built before march 2, 1992.
- Campaign:
- 95V018000 on 02/21/1995
- Component:
- Service brakes, air:drum:chamber
- Manufactured:
- 04/30/1991 - 01/31/1995
- Affected:
- 5,700
- Defect:
- The brake chamber mounting studs can loosen or pull through due to fatigue in the brake chamber housing caused by foundation brake chatter.
- Consequence:
- This condition can result in loss of braking capability.
- Correction:
- Dealers will change the brake lining materials, replace the wing bracket with a reinforced bracket and install brake chambers with reinforced chamber housing and larger (1/2") mounting studs.
- Notes:
- System: brakes; air;drum and shoe system; chamber.vehicle description: heavy duty trucks equipped with 12" and 16" front brake chambers mounted on rockwell foundation brakes.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time, contact freightliner at 1-503-735-8000. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
- Campaign:
- 95V094000 on 05/18/1995
- Component:
- Parking brake:conventional:mechanical
- Manufactured:
- 04/30/1991 - 01/31/1995
- Affected:
- 3,050
- Defect:
- The parking brake lever may not travel far enough over center to assure that it remains in the proper position allowing the vehicle to roll away while parked.
- Consequence:
- If the vehicle is not properly parked with the transmission in the correct position, and if the vehicle is parked on a grade, it could unintentionally roll away increasing the potential for an accident.
- Correction:
- Dealers will remove and replace the parking brake lever with a lever that requires a 25 lb. effort to release.
- Notes:
- System: emergency parking brake; mechanical; lever.vehicle description: medium duty trucks equipped with mechanical parking brake.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time, please contact freightliner at 1-503-735-8000. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Home | Privacy