1989 FORD F250 Recalls (6)

Campaign:
88V182000 on 11/28/1988
Component:
Fuel system, gasoline:storage:tank assembly:mounting
Manufactured:
07/31/1988 - 08/31/1988
Affected:
300
Defect:
Fuel reservoir shields, that protect the reservoir from contact by the transfer case in certain frontal impacts, were not installed.
Consequence:
Fuel spillage in excess of that permitted by fmvss 301could occur.
Correction:
Install fuel reservoir protective shields.
Notes:
System: fuel reservoir shield/fmvss 301.vehicle description: light duty trucks with gvwr over 8,500 lbs.
Campaign:
89V114000 on 07/23/1989
Component:
Fuel system, gasoline:storage:auxillary tank
Manufactured:
06/30/1988 - 03/31/1989
Affected:
3,000
Defect:
Shields on the fronts of the midship mounted fuel tanks were omitted during assembly.
Consequence:
Trucks would not comply with 30 mph impact test offmvss no. 301, fuel system integrity.
Correction:
Install fuel tank shields.
Notes:
System:fuel tank shields/fmvss 301.vehicle description:4 x 2 pickup trucks with 133 inch wheelbase and manualtransmissions.
Campaign:
90V101000 on 06/13/1990
Component:
Power train:automatic transmission:gear position indication (prndl)
Affected:
111,000
Defect:
Under certain conditions, the snap ring that locates the park gear on the output shaft of the transmission may fracture.
Consequence:
When the gear is placed in park, the park gear would notengage, allowing the truck to roll freely if the parking brake is not properlyset. this could result in an accident.
Correction:
Install improved snap ring and revised transmission extension housing.
Notes:
System: park gear snap ring.vehicle description: 4 x 2 light trucks and vans equipped with one-piecedriveshaft and an e40d transmission.
Campaign:
91V146000 on 09/29/1991
Component:
Fuel system, gasoline:storage:auxillary tank:selector devices
Manufactured:
01/31/1989 - 01/31/1991
Affected:
350,000
Defect:
The dual fuel tank selector valve may malfunction and cause an overfill condition in one of the fuel tanks, resulting in an overflow of fuel past the filler cap.
Consequence:
The overflow of fuel past the filler cap causes a fuelleakage, which can result in a fire when exposed to a source of ignition.
Correction:
Replace the dual fuel tank selector valve.
Notes:
System: fuel tank, auxilliary.vehicle description: vans and light trucks with dual fuel tanks produced in thefollowing periods: f150, f250, and f350 light trucks built between february 28,1989 and july, 1989; econoline built between february 28, 1989 andfebruary 11, 1991.note: ford has agreed to recall these vehicles but parts are not yet available.parts will be available in december 1991. you will receive a letter from fordadvising you when to schedule an appointment with your dealer to have the recallwork performed. in the mean time, you can take the following precautions:fill each tank to only 1/3 full.if your vehicle leaks fuel or if you smell fuel, stop using the vehicle andcall ford at (313) 446-4654 and advise them of your problem. refer to fordsafety recall number 91s39. an operator will take your name and telephonenumber. a ford representative will call you back.
Campaign:
92V026000 on 03/10/1992
Component:
Service brakes, hydraulic:foundation components:drum:shoes/linings
Manufactured:
07/31/1987 - 07/31/1991
Affected:
467,000
Defect:
A revised brake lining noise insulator resulted in a decrease in the thermal insulation between the brake lining and the front brake caliper piston. this caused greater heat transfer to the caliper pistons with the potential to overheat the brake fluid and diminish brake effectiveness during severe braking conditions.
Consequence:
Increased stopping distances and inablility to holdvehicles on a steep grade results in increased risk of accident in the event ofa sudden stop or when constant braking is needed to maneuver through areas withsteep grades.
Correction:
Add snap-in insulators that attach to each of the front brake caliper pistons. in addition, vehicles with 7.5 l engines will have insulation added to the engine compartment brake lines.
Notes:
System: brakes; front brake lining.vehicle description: f250 and f350 trucks with 7.3 l diesel and 7.5 l efiengines ; f250 and f350 4x4 models with 5.8 l efi engines.note: ford recommends vehicle operators do not exceed the gcwr and gvwr of theirvehicles, and proper maintenance of the brakes on these vehicles and any trailerparticularly when operating in mountainous areas with long, steep grades.
Campaign:
96V071000 on 04/30/1996
Component:
Electrical system:ignition
Manufactured:
07/31/1987 - 09/29/1992
Affected:
7,900,000
Defect:
The ignition switch could experience an internal short circuit.
Consequence:
This condition could cause overheating, smoke, and possibly fire in the steering column area of the vehicle.
Correction:
Dealers will replace the ignition switch.
Notes:
System: electrical; ignition switch. vehicle description: passenger and multi-purpose vehicles and light duty trucks. note: owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time, should contact ford at 1-800-392-3673. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

1989 FORD F250 TSBs (30)

Bulletin:
BC4225
Component:
063000 engine and engine cooling:exhaust system
Summary:
vehicles with manual transmission may have a lack of power or no start condition caused by a plugged catalytic converter or muffler. *tw
Bulletin:
95524
Component:
061100 engine and engine cooling:engine:gasoline
Summary:
there may be a concern of poor performance, coolant in the oil and engine knocking and/or hydraulic lock on some vehicles. *tw
Bulletin:
95619
Component:
103000 power train:automatic transmission
Summary:
new design transmission range sensor. *tw
Bulletin:
BC2681950503
Component:
063000 engine and engine cooling:exhaust system
Summary:
lack of power or no start condition may be due to exhaust restriction caused by a plugged catalytic converter and/or muffler. *tw
Bulletin:
95711
Component:
063000 engine and engine cooling:exhaust system
Summary:
some vehicles may exhibit a lack of power or a no start condition due to an exhaust restriction. *tw
Bulletin:
9588
Component:
061100 engine and engine cooling:engine:gasoline
Summary:
knocking noise on initial start-up. *tw
Bulletin:
9597
Component:
021000 suspension:front
Summary:
Unknown
Bulletin:
95912
Component:
111000 electrical system:battery
Summary:
Unknown
Bulletin:
951112
Component:
103000 power train:automatic transmission
Summary:
revised design transmission rear case bushing. *tw
Bulletin:
951113
Component:
103000 power train:automatic transmission
Summary:
delayed forward engagement and/or heat stained forward clutch plates after installing center support service. *tw
Bulletin:
BC4225
Component:
061000 engine and engine cooling:engine
Summary:
Unknown
Bulletin:
951515
Component:
013000 steering:gear box (other than rack and pinion)
Summary:
steering gear-replacement of bendix, steering gear with new ross steeering gear. *sd
Bulletin:
96246
Component:
114000 electrical system:wiring
Summary:
Wiring - electrical diode identification and service replacements. *tw
Bulletin:
96249
Component:
103700 power train:automatic transmission:torque converter
Summary:
Torque converter - leak test procedure - service tip. *tw
Bulletin:
96221
Component:
131000 visibility:windshield
Summary:
Windshield and interior glass - fog/film. *tw
Bulletin:
962612
Component:
103700 power train:automatic transmission:torque converter
Summary:
Transaxle - torque converter replacement guidelines and torque converter/transaxle cooling system cleaning procedures - service tip. *tw
Bulletin:
97215
Component:
980000 unknown or other
Summary:
Diagnostic guides for out-of-warranty vehicles to be used as a master copy - diagnostic guides no longer available from adistra. *tw
Bulletin:
97310
Component:
021242 suspension:front:springs:leaf spring assembly:hanger,bracket
Summary:
Noise- "popping/creaking"- front frame or suspension brackets- frame- "popping/creaking"- fastener replacement. *jd
Bulletin:
9747
Component:
160000 structure
Summary:
Frame- rivet replacement with bolts- service tips. *jd
Bulletin:
9748
Component:
061110 engine and engine cooling:engine:gasoline:belts and associated pulleys
Summary:
Accessory drive belts- fead belt comes off- vehicles with 4.9l engine. *jd
Bulletin:
97511
Component:
103000 power train:automatic transmission
Summary:
Fluid- transmission fluid usage charts. *jd
Bulletin:
985A29
Component:
034000 service brakes, hydraulic:foundation components
Summary:
Some vehicles may exhibit excessive brake pedal travel, irregular front lining wear, and brake pull. *yc
Bulletin:
985A38
Component:
034510 service brakes, hydraulic:foundation components:disc:caliper
Summary:
Front caliper piston boots damaged. *yc
Bulletin:
9848
Component:
353600 equipment:air conditioner
Summary:
Announcing the ford oem air conditioning retrofit kit availability. *yc
Bulletin:
9852
Component:
190000 tires
Summary:
Information on tire company telephone numbers for customer assistance. *yc
Bulletin:
9864
Component:
063000 engine and engine cooling:exhaust system
Summary:
Information on a buzzing or rattle noise from the exhaust system. *tt
Bulletin:
010198
Component:
061000 engine and engine cooling:engine
Summary:
Some vehicles may develop "cavitation" erosion in the cylinder wall of the engine. *tt
Bulletin:
98158
Component:
021000 suspension:front
Summary:
Front end shimmy may occur at various driving speeds and is usually induced when hitting bumps, such as large potholes or rough railroad crossings. shimmy is not always verified during road test. *ak
Bulletin:
96728
Component:
101000 power train:clutch assembly
Summary:
Service tip information regarding the reverse clutch piston and piston seal usage. *tt
Bulletin:
985A12
Component:
354600 equipment:mechanical:wrecker and wheel lift devices
Summary:
Recommended guidelines for towing behind recreational vehicles. *tt

Home | Privacy