1989 ACURA LEGEND Recalls (2)
- Campaign:
- 90E043003 on 10/30/1990
- Component:
- Air bags:frontal
- Manufactured:
- 08/31/1988 - 06/30/1990
- Affected:
- 36
- Defect:
- Threaded inflator components may have been damaged during assembly which may allow components to separate when inflator receives a signal to deploy the air bag.
- Consequence:
- Inflator component separation allows hot combustion gases to escape into the passenger compartment which could result in injuries to vehicle occupants.
- Correction:
- Replace air bag modules containing potentially defective inflators.
- Notes:
- Note: this campaign was initiated by trw, inc., manufacturer of the air bag module system:air bag modules.vehicle description: passenger cars equipped with driver side supplemental airbag modules.
- Campaign:
- 95V103001 on 05/23/1995
- Component:
- Seat belts:front:buckle assembly
- Manufactured:
- 12/31/1985 - 02/28/1991
- Affected:
- 3,700,000
- Defect:
- The front safety belt buckle release buttons can break. these red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
- Consequence:
- The safety belts would not provide adequate protection to an occupant in a vehicle crash.
- Correction:
- Owners should promptly check the condition and operation of both front safety belt buckles. carefully inspect the red release button for any breaks or cracks. check that both buckles are operating properly by inserting each latch plate into its buckle, tug on the belt to make sure the latch is securely locked, then press the release button. the latch plate should pop out of the buckle when the button is pressed. if either release button shows any sign of breakage or cracking, or if either buckle fails to operate properly, promptly contact your authorized honda/acura dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. the manufacturer is developing a remedy designed to prevent the failure of the buttons that are not currently broken.
- Notes:
- System: interior; seat belts; belt buckles.vehicle description: 2-door, 4-door and 5-door passenger vehicles equipped with safety belts made by takata corporation.note: if your vehicle is presented to an authorized dealer at an agreed upon service date and the remedy is not provided free of charge within a reasonabletime, please contact honda/acura at 1-800-999-1009. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
1989 ACURA LEGEND TSBs (5)
- Bulletin:
- 92009
- Component:
- 105300 power train:driveline:driveshaft
- Summary:
- clicking noise while clicking. *tw
- Bulletin:
- B930040
- Component:
- 116000 electrical system:ignition
- Summary:
- special return: igniter. *tw
- Bulletin:
- ACU950406
- Component:
- 116000 electrical system:ignition
- Summary:
- campaign resposnsibility report for the 1989-90 legend igniter product update campaign. *tw
- Bulletin:
- 1002
- Component:
- 141100 air bags:frontal:sensor/control module
- Summary:
- Intermittent sra diagnostic trouble code 1-1 to 1-5, driver's airbag inflator circuit. october tech line information. *tt
- Bulletin:
- SB-0708
- Component:
- 199000 tires:pressure monitoring and regulating systems
- Summary:
- Acura: there are guidelines for various situations and procedures including: tire pressure valve stem installation, trailer stability malfunction light is on, engine oil application guide, new software, new transmission fluid, notchy steeri
Home | Privacy