1988 HOLIDAY RAMBLER ALUMA LITE Recalls (4)
- Campaign:
- 88V152000 on 10/10/1988
- Component:
- Equipment:recreational vehicle:lpg lines and fittings
- Manufactured:
- 06/30/1984 - 11/30/1987
- Affected:
- 112
- Defect:
- Leak in lp gas service line caused by line contacting rear suspension system which results in line rupture.
- Consequence:
- A ruptured line would release lp gas to the atmospherecreating the possibility of an explosion and/or fire and potential personalinjury to any occupant or person in close proximity of the motorhome.
- Correction:
- The lp gas service line will be relocated to preclude contact with the rear suspension system.
- Notes:
- System: fuel/lp gas.vehicle description: motorhomes model aluma lite and monitor class a equippedwith mor/ryde suspension system.
- Campaign:
- 89V039000 on 04/04/1989
- Component:
- Equipment:recreational vehicle:lpg lines and fittings
- Manufactured:
- 08/31/1987 - 03/31/1988
- Affected:
- 86
- Defect:
- Rubber gasoline hose used to accommodate relocation of the fuel tank is subject to deterioration over time.
- Consequence:
- A leak in a deteriorated rubber line could spray gasolineunderneath the chassis and result in an undercarriage fire.
- Correction:
- Replace rubber gasoline line with nylon line.
- Notes:
- System: gasoline line.vehicle description: class c motorhomes built on ford e350 econoline chassis.
- Campaign:
- 89V054000 on 04/24/1989
- Component:
- Service brakes, hydraulic:foundation components:hoses, lines/piping, and fittings
- Manufactured:
- 08/31/1987 - 02/29/1988
- Affected:
- 118
- Defect:
- Close proximity of certain hoses to high heat emitted from the catalytic converter would cause the hose to deteriorate.
- Consequence:
- This could result in a sudden loss of power, creatingthe possibility of a rear end crash.
- Correction:
- Install a heat shield over the catalytic converter to protect the hoses from heat deterioration.
- Notes:
- System: vacuum and hydraulic hoses.vehicle description: class c motorhomes built on ford e350 econoline chassis.
- Campaign:
- 92V183000 on 12/29/1992
- Component:
- Seats
- Manufactured:
- 05/31/1986 - 06/30/1992
- Affected:
- 10,350
- Defect:
- The driver and passenger front outboard occupant seat have been designed with the safety belt anchorage on the seat structure. it is possible, in a vehicle crash, that the seat structure would fail to withstand the forces within the limits set forth in fmvss 207 and fmvss 210.
- Consequence:
- The seating and safety belt systems fail to comply withthe safety standards of fmvss 207 and 210, and could increase the risk of injuryto occupants in the event of a crash or sudden stop.
- Correction:
- Relocate the seat belt anchorage assemblies from the seat pedestal assembly to the vehicle frame through the floor structure to reduce the load on the seat pedestal assembly in the event of a sudden stop or accident.
- Notes:
- System: seating system, fmvss 207; and safety belt anchorages, fmvss 210.vehicle descriptions: mobile homes.
Home | Privacy