1987 GMC B6P042 Recalls (3)

Campaign:
87V121000 on 08/06/1987
Component:
Service brakes, air:drum:chamber
Manufactured:
09/30/1982 - 05/31/1987
Affected:
7,870
Defect:
Severe brake chatter may cause the brake chamber mounting brackets on either side to develop cracks in the weld area where the s cam shaft tube attaches to the chamber support section.
Consequence:
Brackets can break, resulting in loss of braking abilityat that front wheel, and possibly restricted steering, which could lead to avehicle crash without prior warning.
Correction:
As necessary, install new reinforced front brake chamber mounting brackets and install a front brake limiting valve on vehicles without one.
Notes:
System: brakesvehicle description: school buses equipped with 7,500 lb. front axle and mediumduty trucks equipped with a 7,000 lb. front axle.

Campaign:
88V137000 on 08/21/1988
Component:
Service brakes, air:supply:hoses, lines/piping, and fittings
Manufactured:
01/31/1987 - 02/29/1988
Affected:
1,503
Defect:
Melting of the air brake lines can occur where the air lines route under the left hand frame rail near the exhaust pipe.
Consequence:
This could result in partial or total loss of servicebrakes without warning, which could lead to a vehicle crash.
Correction:
Reroute air line harness away from the exhaust system; replace harness if heat deterioration has occured.
Notes:
System: air brake lines.vehicle description: cowl model school buses with air brakes and gasolineengines.

Campaign:
89V071000 on 06/04/1989
Component:
Fuel system, gasoline:storage:tank assembly:filler pipe and cap
Manufactured:
08/31/1985 - 03/31/1989
Affected:
21,558
Defect:
A crack may develop adjacent to the fuel tank seam weld attaching the tank end cap.
Consequence:
This could result in a leak or dripping from the fueltank with potential fire hazzard.
Correction:
Install limiter cushions on the tank support brackets or replace tank, if necessary.
Notes:
System: fuel tank.vehicle description: school bus chassis w/350 or 366 cu. in. gasoline engines.

Home | Privacy