1984 FORD MUSTANG Recalls (4)

Campaign:
83V134000 on 01/10/1984
Component:
Seat belts:front:anchorage
Manufactured:
07/31/1983 - 11/30/1983
Affected:
530,000
Defect:
The bolts that attach the d-shaped ring for the shoulder belt are inadequately supported by the material in which they are mounted. the attachment does not comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages".
Correction:
Dealers will install new attaching hardware to improve the strength of the mounting.
Notes:
Vehicle description: passenger vehicles and light trucks.system: interior systems; seat belts and upper torso restraint attachments.consequences of defect: in severe collisions, the shoulder belt attachmentcould separate, increasing the possibility of occupant injury.note: manufacturer advises that seat belts should continue to be used at alltimes, as substantial benefits may still be obtained.

Campaign:
84V119000 on 11/06/1984
Component:
Fuel system, gasoline:carburetor system
Manufactured:
07/31/1983 - 02/29/1984
Affected:
85,000
Defect:
The secondary throttle shaft may, with accumulated mileage, become contaminated and may stick in a partially open position while driving.
Consequence:
Consequence of defect: this sticking could result in a faster speed than intended, possibly resutling in an accident.
Correction:
The primary to secondary throttle closure link on the carburetor will be replaced free of charge.
Notes:
Vehicle description: passenger vehicles equipped with 5.0 liter engines, and trucks and multipurpose passenger vehicles equipped with 5.8 or 7.5 liter engines; vehicles are equipped with 4 barrel carburetors.system: fuel; carburetor secondary throttle control.

Campaign:
92V063000 on 04/28/1992
Component:
Seat belts:front:anchorage
Manufactured:
08/31/1983 - 07/31/1985
Affected:
306,000
Defect:
The plastic sleeve in the front safety belt tongue assembly which retains the lock bar can deteriorate from prolonged exposure to sunlight and become displaced, causing the tongue to detach from the safety belt webbing.
Consequence:
If the tongue detaches from the safety belt webbing, thesafety belt would not attach to itself, resulting in increased risk of injuryto the seat occupant in the event of a sudden stop or vehicle crash.
Correction:
Ford will repair the safety belts experiencing this condition regardless of vehicle age or condition.
Notes:
System: safety belts.vehicle description: passenger cars.

Campaign:
07E064000 on 08/23/2007
Component:
Fuel system, gasoline:delivery:fuel pump
Affected:
34,000
Defect:
Certain federal-mogul aftermarket fuel pumps sold under the brand names of carter, accuflow, napa, truflow, parts depo, and parts master, shipped between august 2006 and july 2007 for use on the vehicles listed above. the fuel pump diaphragm in certain production runs may have been improperly installed or inadequately tested which may cause the fuel pump to leak.
Consequence:
A leaking fuel pump could create a vehicle fire hazard.
Correction:
Federal-mogul will notify owners and replace the defective fuel pumps free of charge. the recall began on october 15, 2007. owners can contact federal-mogul at 248-354-7700.
Notes:
This recall only pertains to aftermarket carter, napa, accuflow, tru flow, parts master, and parts depot brand fuel pumps and has no relation to any original equipment installed on the listed motor vehicles.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

1984 FORD MUSTANG TSBs (13)

Bulletin:
9562
Component:
034500 service brakes, hydraulic:foundation components:disc
Summary:
roughness concern during brake application. *tw
Bulletin:
BC2850950401
Component:
034500 service brakes, hydraulic:foundation components:disc
Summary:
Unknown
Bulletin:
95212
Component:
036000 service brakes, hydraulic:antilock
Summary:
the use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par
Bulletin:
96246
Component:
114000 electrical system:wiring
Summary:
Wiring - electrical diode identification and service replacements. *tw
Bulletin:
96249
Component:
103700 power train:automatic transmission:torque converter
Summary:
Torque converter - leak test procedure - service tip. *tw
Bulletin:
96221
Component:
131000 visibility:windshield
Summary:
Windshield and interior glass - fog/film. *tw
Bulletin:
97511
Component:
103000 power train:automatic transmission
Summary:
Fluid- transmission fluid usage charts. *jd
Bulletin:
985A13
Component:
034500 service brakes, hydraulic:foundation components:disc
Summary:
The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable. *yc
Bulletin:
9888
Component:
103000 power train:automatic transmission
Summary:
Information on a new transmission fluid usage chart. *yc
Bulletin:
9852
Component:
190000 tires
Summary:
Information on tire company telephone numbers for customer assistance. *yc
Bulletin:
9874
Component:
061000 engine and engine cooling:engine
Summary:
A new silicone gasket and sealant. *yc
Bulletin:
002310
Component:
103600 power train:automatic transmission:cooling unit and lines
Summary:
Subject regarding contamination from prior transmission concerns or excess wear may be trapped in the transmission fluid cooling system. *tt
Bulletin:
01157
Component:
980000 unknown or other
Summary:
Information regarding transmission fluid usage charts. *slc

Home | Privacy