1984 CHEVROLET CAMARO Recalls (7)

Campaign:
84V011000 on 02/21/1984
Component:
Seats:front assembly:recliner
Manufactured:
06/30/1983 - 08/31/1983
Affected:
76,586
Defect:
Some vehicles have bucket seat back locks that do not conform to federal motor vehicle safety standard 207, anchorage of seats. in event of a crash, the seat back lock may not function.
Correction:
Inspection of seat back locks will be performed. locks that have bent, broken or missing hooks will be replaced.
Notes:
Vehicle description: two door passenger vehicles and light trucks equipped withar9 or av5 bucket seats.system: interior systems, seat back locks.consequences of defect: the seat may fold forward in a crash, and wouldincrease the likelihood of injury to the seat occupant.
Campaign:
84V093000 on 09/10/1984
Component:
Service brakes, hydraulic:foundation components:hoses, lines/piping, and fittings
Manufactured:
12/31/1983 - 01/31/1984
Affected:
30,868
Defect:
Rear brake hoses were not properly manufactured and do not conform to the requirements of federal motor vehicle safety standard 106, "brake hoses". hoses could come loose from the end fittings when subjected to a pulling force.
Correction:
A new hose will be installed if necessary. in addition, brakes will be serviced.
Notes:
Vehicle description: passenger vehicles.system: service brakes; rear brake hose.consequences of defect: separation of the hose from its metal end fitting wouldresult in loss of brake fluid and loss of some brake action. an accident couldresult under circumstances requiring minimum stopping distance.
Campaign:
85V169000 on 01/09/1986
Component:
Seat belts:front:webbing
Manufactured:
09/30/1982 - 02/28/1985
Affected:
738,485
Defect:
Dislocation of a spring cover will not allow the shoulder belt to retract after being extended. consequence of defect: although inertial feature that locks the lap belt and shoulder belt in the event of an accident are not affected, if slack is more than recommended in owners manual, injuries to upper body and head would be increased in an accident.
Correction:
Install retaining springs on spring cover of front shoulder belt retractor and, when required, retractors will be replaced.
Notes:
System: shoulder seat belt retractor. vehicle description: passenger cars.
Campaign:
90V105000 on 06/25/1990
Component:
Seat belts:front:buckle assembly
Manufactured:
08/31/1983 - 05/31/1990
Affected:
1,500,000
Defect:
Plastic components of seat belt buckle assemblies do not contain an ultra violet stabilizer, and exposure to direct sunlight and elevated interior temperatures could weaken the plastic components.
Consequence:
This could result in breakage of plastic components whichcould prevent buckle from latching and protecting occupant in a sudden stop oraccident.
Correction:
Replace or repair seat belt buckle.
Notes:
System: seat belt buckle.vehicle description: passenger cars.
Campaign:
91V055000 on 04/10/1991
Component:
Parking brake:conventional
Manufactured:
02/28/1981 - 06/30/1986
Affected:
179,036
Defect:
Parking brake adjuster fails to operate and do not work after brake pad wear.
Consequence:
Parking brakes will not completely hold a parked vehiclewhen parked on a slope, causing unintended vehicle rollaway which could resultin a vehicle accident.
Correction:
Replace nonfunctioning parking brake adjusters.
Notes:
System: parking brake.vehicle description: passenger cars; firebirds and camaros with manualtransmissions and rear disk brakes and fieros with manual transmissions.
Campaign:
06E043000 on 05/21/2006
Component:
Fuel system, gasoline
Affected:
88,303
Defect:
Certain replacement fuel filters, fram brand name p/n g3727, with date codes x52911 through x60801 sequentially or x600141 and a mexico country or origin marking on the fuel filter housing manufactured from october 18, 2005, through march 21, 2006, sold for use on the vehicles listed above and on certain school buses. (to see the school bus engine sizes, click on "document search" and then "bus applications"). the connector on the fuel filter was not manufactured to honeywell's specification. as a result, the o-ring may not seat correctly on the fuel line.
Consequence:
This condition may cause an inadequate seal at the connection, potentially leading to a fuel leak. in the presence of an ignition source, a fire could occur.
Correction:
Honeywell will notify owners and replace the fuel filters free of charge. the recall began on october 18, 2006. owners may contact fram customer service at 1-800-890-2075 (option 1).
Notes:
This recall only pertains to aftermarket fram fuel filters and has no relation to any original equipment installed on the vehicles listed.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
Campaign:
07E088000 on 10/29/2007
Component:
Equipment
Affected:
121,680
Defect:
Certain honeywell fram racing brand hp4 and hp8 oil filters that were manufactured from may 25, 2006, through september 14, 2007, and sold for use as replacement equipment for vehicles list above. the affected filters are marked with a date code a61451 through a72571 sequentially. the date code and part number appear on the filter housing. fram racing hp4 and hp8 oil filters not bearing a date code in this range are not affected by this recall. the gasket of the oil filter becomes more pliable under high temperatures and pressures.
Consequence:
This condition may cause inadequate sealing and loss of engine oil, possibly resulting in a fire.
Correction:
Honeywell will replace the affected oil filters free of charge. the recall began during november 2007. owners can contact fram customer service toll-free at 1-800-890-2075.
Notes:
Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

Home | Privacy