1981 ISUZU PICKUP TRUCK Recalls (3)
- Campaign:
- 81V058000 on 05/17/1981
- Component:
- Fuel system, gasoline:storage:tank assembly:filler pipe and cap
- Manufactured:
- 07/31/1979 - 11/30/1980
- Affected:
- 133,000
- Defect:
- On some vehicles, the pressure could increase inside the fuel tank from high surrounding temperatures when the fuel tank is more than half full.
- Correction:
- Dealer will install a restrictor valve into the fuel filler pipe, without charge to owner.
- Notes:
- Vehicle description: light trucks and passenger vehicles equipped withcontinuous fuel injection systems.system: fuel; fuel tank.consequences of defect: under these conditions, if fuel filler cap is openedrapidly, fuel could spurt out onto nearby persons, possibly causing skinirritation or fire in the presence of a source of ignition.note: fuel filler cap should be opened slowly to reduce chances of fuelspillage until the dealer has made the necessary modifications.
- Campaign:
- 81V106000 on 09/16/1981
- Component:
- Steering:linkages:tie rod assembly
- Manufactured:
- 07/31/1981 - 07/31/1981
- Affected:
- 4,800
- Defect:
- The left and right outer tie rod ends of the steering system may have circumferential cracks due to an improper machine set-up in the manufacturing process.
- Correction:
- The tie rod ends will be inspected and, if necessary, replaced at no charge to owner.
- Notes:
- Vehicle description: passenger vehicles and pick-up trucks.system: steering; tie rod ends.consequences of defect: if a vehicle having a cracked tie rod is driven overrough roads for an extended period of time, the tie rod could loosen andeventually the outer shell would separate from its ball socket. this couldresult in loss of steering control and, possibly, an accident.
- Campaign:
- 82V016000 on 02/28/1982
- Component:
- Steering:linkages:tie rod assembly
- Manufactured:
- 07/31/1981 - 07/31/1981
- Affected:
- 5,200
- Defect:
- A lock nut which secures the tie rod to the inner ball joint of the steering system may not have been securely fastened on some of the involved vehicles during assembly. if this condition exists and the vehicle is driven along poor roads for an extended period of time, the tie rod could separate from the steering assembly.
- Correction:
- Dealer will check the lock nut for adequate tightness, correcting where necessary.
- Notes:
- Vehicle description: passenger vehicles and pick-up trucks.system: steering; tie rod, inner ball joint, lock nut.consequences of defect: this condition could cause loss of vehicle control andan accident.
Home | Privacy