1980 NISSAN 720 Recall

Campaign:: 81V063000 on 06/01/1981
Component:: Power train:axle assembly:axle shaft
Manufactured:: 11/30/1979 - 03/31/1981
Affected:: 42,735
Defect:: If involved vehicles are driven in deep mud or water for long distances and an extended period of time, mud and water may penetrate the front wheel hub through the grease seal. under these conditions the front wheel bearing could wear prematurely, due to bearing contamination.
Correction:: The dealer will install an improved grease seal. upon inspection, if signs of bearing wear or rust are present, the bearing will also be replaced at no cost to owner.
Notes:: Vehicle description: pick up truck, four-wheel drive.system: suspension; front wheel bearing.consequences of defect: if owner/driver continues to operate the vehicle inthis condition, the bearing may seize, possibly resulting in an accident.note: until the correction is made, the owner is advised to try and avoiddriving in deep mud or water. if an unusual noise develops in the front of thevehicle, have it checked immediately.

1980 NISSAN 720 TSBs (3)

Bulletin:: NTB-09-030
Component:: 110000 electrical system
Summary:: Nissan: the 12 volt battery is an important part of the vehicle electrical system and is required to stay connected when the engine is running. to prevent damage to vehicle electronic components follow the instructions/cautions. no mod
Bulletin:: NTB-09-101
Component:: 199000 tires:pressure monitoring and regulating systems
Summary:: Nissan: tire pressure monitoring system (tpms) warning light on/flashing. no models or model years listed. *pe updated on 08-11-2011. *kb
Bulletin:: NTB-09-129
Component:: 355200 equipment:other:owners/service/other manual
Summary:: Nissan: vent control valve replacement. when replacing the evap canister vent control valve for reason: use the one listed on page 2; for vent control valve replacement procedure, refer to the appropriate section of the electronic service