1976 MACK CF Recalls (6)
- Campaign:
- 78V172000 on 10/11/1979
- Component:
- Steering:linkages:knuckle:spindle:arm
- Affected:
- 13,800
- Defect:
- The existing cross steering arms may have insufficient fatigue life in the neck area. this is near the boss for the cross steering tube ball joint connection. failure of either of the cross steering levers could lead to loss of steering control of the right front wheel.
- Correction:
- The dealer will inspect and, if necessary, install cross steering arms of improved design and greater strength.
- Notes:
- Vehicle description: truck tractors.system: steering; steering arm.consequences of defect: loss of steering control could lead to loss of vehiclecontrol and an accident.
- Campaign:
- 77V173000 on 10/11/1979
- Component:
- Engine and engine cooling:cooling system:fan
- Affected:
- 48,000
- Defect:
- The flex blade fans on the involved vehicles may develop cracks in the laminated stiffener as a result of fatigue during operation. if such a condition exists and the cracks go undetected, continued operation could cause pieces of the stiffener to break off.
- Correction:
- Dealer will replace the original fan with a steel fixed blade fan, free of charge.
- Notes:
- Vehicle description: trucks equipped with six-cylinder engines.system: engine cooling; fan.consequences of defect: broken pieces can be propelled outside of the fanshroud and will present an immediate danger and possible injury to personsstanding nearby.note: prior to correction, vehicle should not be serviced with the hood raisedand the engine running.
- Campaign:
- 81V154000 on 01/07/1982
- Component:
- Steering:wheel and handle bar
- Manufactured:
- 08/31/1976 - 08/31/1981
- Affected:
- 826
- Defect:
- The floorboard opening and the steering column seal bracket may not allow sufficient clearance for the shaft to turn freely in the center of the bracket/seal. the pinch bolt in the column yoke may bind or lock the column against the bracket, allowing little or no wheel return.
- Correction:
- Dealer will enlarge the hole in the floorboard to provide clearance for the steering column u-joint pinch bolt. a new bracket and clamp will also be installed without charge to owner.
- Notes:
- Vehicle description: truck fire chassis equipped with sgp48 steering gear.system: steering; u-joint, floorboard.consequences of defect: if the steering assembly locks in place, loss ofvehicle control, without warning, and an accident could result.
- Campaign:
- 83V037000 on 04/26/1983
- Component:
- Steering:wheel and handle bar
- Manufactured:
- 08/31/1976 - 08/31/1981
- Affected:
- 1,455
- Defect:
- On the involved vehicles the floorboard opening and the steering column seal bracket do not have sufficient clearance to allow the shaft to turn freely. this causes the pinch bolt to bind or lock against the seal bracket.
- Correction:
- The hole in the floorboard will be enlarged to allow sufficient clearance of the steering column u-joint pinch bolt, and a new bracket and lamp will be installed at no charge to owner.
- Notes:
- Vehicle description: fire fighting equipment chassis equipped with sgp48steering gears.system: steering; steering column shaft u-joint clearances.consequences of defect: there will be little or no wheel return; loss ofsteering control without prior warning could result in an accident.
- Campaign:
- 85V157000 on 12/03/1985
- Component:
- Steering:wheel and handle bar
- Manufactured:
- 05/31/1973 - 09/30/1985
- Affected:
- 143
- Defect:
- The splined steering shaft may not be sufficiently engaged as designed due to inaccurate drilling of the holes in the frame to which the cab front mount member is bolted. under certain conditions the steering shaft may disengage. consequence of defect: a jarring impact might cause disengament of the splined shaft resulting in loss of steering control and possibly an accident.
- Correction:
- Replace shafts which measure under the minimum engagement dimensions with longer shaft.
- Notes:
- System: steering shaft. vehicle description: fire trucks.
- Campaign:
- 91V070000 on 05/14/1991
- Component:
- Steering:linkages
- Manufactured:
- 11/30/1967 - 11/30/1990
- Affected:
- 3,673
- Defect:
- Stresses imposed on the lever during turning maneuvers and/or impact incidents, such as would be caused by curbs or road surface irregularity, reduce the life expectancy of the part. the steering lever may crack and eventually the stresses could cause the steering lever to break.
- Consequence:
- A broken steering lever will cause loss of steeringcontrol without prior warning which may result in a vehicle crash.
- Correction:
- Replace the defective steering arms.
- Notes:
- System: steering levers.vehicle description: cf model fire chassis with gross axle weight ratings of12,000 pounds or greater and equipped with power steering.note: the specific mack axles affected are: fa532, faf532, fafw537, fafw5372,fafw13.5, faw538, faw14.3, fa604, fa6042, faw616, faw618, faw617, and faw20.
Home | Privacy